H+Rsport + camberkit = Control arm issue?

[Final 204]

ok i have some H+R sports on the way...( 1.75 f drop ) and i'll be picking up a camber kit...

now i've been reading about the "control arm issue" when it hits the fender on hard bumps... i'm wondering if i'll experience that or not with this setup of 1.75" front drop..

anyone with this setup please lemme know

thanks

[Final 204]

ahh i know like 8 of you guys at least have sports on someones gotta know

[93accordexcoupe]

yea i was wondering the same thing but with neuspeed race springs, someone has to know, i read ATX's sticky but im still wondering

[accrdpower]

u shouldn't have any problems what so ever with a 1.8 even a 2in u shouldn't...i dropped mine 3.5 and i had some slight tissues with huge bumps but not that much. just be careful not to go 50mph over speed bumps.

[XI_accord]

there won't be a problem i droped my ride 2" and i haven't had a problem yet just be careful that the bump isn't to deep or it well hit hardcore. But the lower you get your car. You will notice you can take the cures faster. I got Skunk2 coilovers but i need a camber kit anybody selling one for a 93 accord or know where i can get one?

[93accordexcoupe]

i think chiovnicda or something like that was selling ignalls camber kits

[Final 204]

there won't be a problem i droped my ride 2" and i haven't had a problem yet just be careful that the bump isn't to deep or it well hit hardcore. But the lower you get your car. You will notice you can take the cures faster. I got Skunk2 coilovers but i need a camber kit anybody selling one for a 93 accord or know where i can get one?

haham man, you need to read the whole thread. i said WITH camber kit. then you say it wont affect cause yers didn't . then you say you need a camber kit. meaning u don't actually know the answer :| thanx anyway tho

[Genki]

I'm almost done installing my H&R sport springs with KYB AGX shocks, so I'll let you know the verdict. I already put in the fronts and there's still a pretty big gap so I doubt the control arm would rub or hit anything. I did a little test drive when i finished the fronts too and the ride was more smooth than my stock shocks.. I had my AGXs set to 2 (which is medium stiffness) and I felt it was a bit too soft for me. BTW, my accord looks like yours haha. Same color, year, model

[Final 204]

I'm almost done installing my H&R sport springs with KYB AGX shocks, so I'll let you know the verdict. I already put in the fronts and there's still a pretty big gap so I doubt the control arm would rub or hit anything. I did a little test drive when i finished the fronts too and the ride was more smooth than my stock shocks.. I had my AGXs set to 2 (which is medium stiffness) and I felt it was a bit too soft for me. BTW, my accord looks like yours haha. Same color, year, model

u got a camber kit to go with that?

[Genki]

I don't think i'll even need a camber kit. With less than a 2" drop, the wheel alignment shop should be able to correct the camber without a kit.

[headbussaboi]

OK, I've got Dropzone coilovers with KYB gr-2's and I don't know if my answer will help your question but my car is now dropped all around about 3 inches. My tires are 215/35/18. Although the ride is kinda bouncy, the camber kits up front did NOT make the upper control arm hit the fender wall. So you should be fine.

[Final 204]

OK, I've got Dropzone coilovers with KYB gr-2's and I don't know if my answer will help your question but my car is now dropped all around about 3 inches. My tires are 215/35/18. Although the ride is kinda bouncy, the camber kits up front did NOT make the upper control arm hit the fender wall. So you should be fine.

cool that helps man. are you sure tho? did you hit any hard bumps? i would be pretty sure 3 " would for sure hit, but hey whatever

[1badwag]

I don't think i'll even need a camber kit. With less than a 2" drop, the wheel alignment shop should be able to correct the camber without a kit.

honda has no factory camber adj...

when you get a alignment let them know that the aarms will hit the unibody if there adjusted out to far, to prevent any probs. (mostly on excesive drops)

[accrdpower]

cool that helps man. are you sure tho? did you hit any hard bumps? i would be pretty sure 3 " would for sure hit, but hey whatever

hahaha no way...i have mine dropped currently 3.6in and no problems lol just get new struts and problem solved !!!!