5 lug axle bolt & wheel stud problem

[Darkcloud]

Ok I did my rear 5 lug swap and I have 2 probs.

1. wthe 32mm axle nut wont thread on all the way which I knew. For those that encountered this prob can you shine some light on how to get arounf this, I used the CD5 rear disc swap which was availble at the time for me, the rear axle stud is shorter then the cb rear axle stud. If anyone used the CD5 and did the rear 5 lug swap can you help me out


2. My wheel studs wont seat. they move arounf I kind of figured out why, my solution is to either jb weld the studs in place, or wait 5-6 months and buy new rear wheel bearings.
But can I find extened studs with finer seat threads???

Here is a pic(look near the top of the threads)

['93CB7Ex]

take the hubs off and beat the studs in.

[Darkcloud]

Thats not going to work, look at the seat threads, 1 has more groves then the arp studs, hince why they move

[Darkcloud]

Anyone???

[SSMAccord]

I used CD5 rear suspension components to complete my 5 Lug swap. The prelude nut doesnt seat onto shaft correctly, I am using the CB7 axle nut since it goes on further and can be correctly staked in place.

[Darkcloud]

So I need the cb axle nut and not the cd5 correct??

[i-07]

yes and no i used a cb7 rear end on the cb9 since it is different but the nut did not sit all the way down just tighten it down as much as you can.

you had put the stud in and you had an issue?

[Darkcloud]

Yea the wheel stud wont seat. i can tighten a wheel on them but when loosened they wiggle and I can push em out with ease by had

[i-07]

Yea the wheel stud wont seat. i can tighten a wheel on them but when loosened they wiggle and I can push em out with ease by had

ooh thats not good that means you need wider ones then

[Darkcloud]

Yea but I dont know where to look or even kno the size of the base

[i-07]

wut brand studs you get?

[Darkcloud]

Arp

[i-07]

arent they the good ones? doe it do it on bot the front and the rear or just one or the other?

[Darkcloud]

Yea arp is good. The stud spins where the red circle is on the pic above

[i-07]

Yea arp is good. The stud spins where the red circle is on the pic above

hmm not sure wut to say measure both them