advice needed

[That1guyN8]

so i have skunk 2 coil overs on my tokico blues and i have a system in the back that ways a whole lot so my back end bounces around so bad. Just wondering what I can do to decrease the bouncing. Should I put adjustable struts on or switch out springs?

[JDMcb7]

All you can do is switch out springs. Those skunk2's have horrible spring rates, and they aren't really meant for daily driving. Well at least not comftorable daily driving anyways.

[92accordlex]

All you can do is switch out springs. Those skunk2's have horrible spring rates, and they aren't really meant for daily driving. Well at least not comftorable daily driving anyways.

i agree switch springs. Skunk2 gets

[d21x]

yup its true, the spring rates that i have from skunk are 560lb/in, EXTREMLY STIFF!!! go get some hypercoil springs for a replacement or Eibach ERS.

this is pretty nice, 300lb/in 8"x2.5" perfect size too. btw, hypercoil springs are used in race cars like nascar.

http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

[That1guyN8]

so wait if i get those springs, i can still adjust my height? i want a 2.3' drop in front and 2.1' in back

[azian21485]

make sure the new springs you buy (if you go this route) have the same dimensions as the skunk2 springs (inner diameter and length)...you can opt to go with a slightly longer spring if you like but too long is no good

[That1guyN8]

so wait i need to get the same length springs? But what about the skunk 2's in the back? The ones in the front are longer.......couldn't i put the same size front one's in the back? Springs confuse me.......lol

[azian21485]

they don't have to be the same length...but try to get within the vacinity of whatever springs your using..usually 8 inch is what i see many people/companies using...

inner diameter is more important because if that's off by a little your springs are useless

[d21x]

skunk2 have a 2.5" inner diameter, and i think 8" is perfect, a lil too low if u're not using koni yellows.

on my koni yellows, i had to move the c-clip all the way to to top so the highest level on the sleeves were where i wanted it to be. (yea i know doesnt make sense..)

[That1guyN8]

so if i get those hyper coils those will decrease mmy bounce alot? thanks guys