What is better when it comes to sway bars

[mndude07]

too much off throttle oversteer.

I haven't got to this stage yet. but I plan on only beefing up the rear for starters. rear strut bar and rear underbracing if it's available.

is this bad. then maybe ill get the weakest front bar i can find.

concentrating on getting as much oversteer as possible.

With a fwd, the more gas you give it, the more understeer you're going to create...no matter what. So, you want as much off-throttle, corner entry oversteer as possible because that's your only chance to rotate the car. You have the right idea.

[xkjnboix]

find the hollow 27mm one and drill a small hole at one end and buy some liquid polyurethane and fill it ^__^

[mndude07]

find the hollow 27mm one and drill a small hole at one end and buy some liquid polyurethane and fill it ^__^

I really hope you're kidding.

[C91BLX7]

There's a 30mm one available for our cars? wut? How would that be?

[mndude07]

There's a 30mm one available for our cars? wut? How would that be?

There isn't one for the rear that I know of.

[KB7]

There's a 30mm one available for our cars? wut? How would that be?

the 30 mm bar is a front bar, (actually 30.4) chromemoly
made by tanabe, and it is listed as only being available for the 94-97, but it bolts right up (according to a few members, i made a thread but it was lost in the LONG-term site shutdown period)


you will also notice they also make a 20 mm rear bar as well

you will find it as the first bar listed under "HONDA"
only three people on here have admitted to buying it via their mr threads, (or not deleted their posts), with only two of those people actually installing it. you will need to search the mr threads, i forget who had them, but almost all three were pretty nice cars

[esskater892]

is the legend a 18mm? and how much would i notice the change? also. if i read right, the front of our cars are good to go, its the rear that needs to be beefed up? just to get it straight, our cars have understeer and we want to create oversteer,,well neutral as much as possible right? man i think im just gonna get the legend rear sway bar and buy an rear x brace. that should be enough.

[Tippey764]

A 2nd gen legend sway bar will not fit an accord

Many people with 1st gen legends have tried ( 1st gen legends use the same rear sway bar as an accord )

And no a 1st gen legend sway bar is not an upgrade.

[esskater892]

A 2nd gen legend sway bar will not fit an accord

Many people with 1st gen legends have tried ( 1st gen legends use the same rear sway bar as an accord )

And no a 1st gen legend sway bar is not an upgrade.

i thought there was a size difference? so is there a legend rear sway bar that fits or not? i mean i tried to look around cause i remember seeing pl saying one of the legends rear sway fit.

[Tippey764]

1st gen legend rear sway bars fit our acords but they're smaller

2nd gen legend sway bars will not fit at all.

[Night Wolf]

the 30 mm bar is a front bar, (actually 30.4) chromemoly
made by tanabe, and it is listed as only being available for the 94-97, but it bolts right up (according to a few members, i made a thread but it was lost in the LONG-term site shutdown period)


you will also notice they also make a 20 mm rear bar as well

you will find it as the first bar listed under "HONDA"
only three people on here have admitted to buying it via their mr threads, (or not deleted their posts), with only two of those people actually installing it. you will need to search the mr threads, i forget who had them, but almost all three were pretty nice cars

I got the full tanabe sway bar set on the wagon. & let me tell you, it was a night & day difference. stays planted on sharp turns. just ask some members that have ridden in the wagon while I drive around.

& Im not surprized, because it has a very rigid construction. even the ends for the sway bar end-links are a thick, almost 1/2" steel plate welded to a flat end of the bar. plus it goes on just like the OEM. none of that drill on an adapter bull shit like the progress one. & it wont hang down dangerously low like that one either.