Wanted to post this up for you guys to see before I try asking John over at ESP. Didnt know if anyone else had the same issue im having. The bar seems to be about 6" away from fitting in 2 spots. In the pictures I have the pass. side mounted to the strut tower. The firewall mount is just about under the windshield and the drivers side mount is no where near fitting. When we tried to pull the drivers side mount towards the front of the car the pass. side mount twisted and we could tell something was extremely wrong. To get the bar onto the drivers side strut tower would mean snapping the pass. side mount, no doubt about it. We tried it the reverse way too, putting the drivers side on first. The bar was even further away from fitting this way. Then we tried setting it down flat onto all 3 mounting points, once again, no where near fitting. Any idea what I can do to make this work before I take this up with john?
This picture just shows that the bar is on straight on the pass. side strut tower.
Look how far the firewall mount is behind the firewall
This picture just shows that the bar is on straight on the pass. side strut tower.
Look how far the firewall mount is behind the firewall
Comment