Vigor Rear Sway Bar??

[StinkinLincoln]

Acura Vigor Rear sway Bar Swap?? Anybody do this swap?? How hard is it and what are the rewards??

[StinkinLincoln]

PS Going on my 93 EX with a stock 14mm rear sway bar...

[cali-racer]

need to search.

a lot of people done it, like myself. its thicker.

[StinkinLincoln]

need to search.

a lot of people done it, like myself. its thicker.

I did a lil but the where old and I wanted to ask in my own thread....

[PR CB7]

16mm>14mm
vigor accord

the car will handle just a tad better, not that much dog tracking every time you make a hard turn

get a 22mm and your rear end will follow you eveywhere you go

[StinkinLincoln]

yea im looking Cheep...lol

22mm would be nice though..lol

[Leung]

I pulled one from an early 90s because Vigors weren't made after 94.

i was going to put it on my car until i found out i was looking at the wrong spot to mount the brackets that were in the middle and i didnt feel comfortable with drilling.

[CB7Man]

The vigor sway bar is a 100% bolt in ready to go.
I've noticed less body roll on quick turns, it springs back faster. But then again I had NO rear sway bar before.
I killed a bunch of birds with one wrench
Vigor Rear Sway, Rear Disk swap, All new control arms
If you dont have a sway bar (non-EX) you will need to swap the main crossmember for the rear


By the way my rear disk swap had 345K miles on them when I put them in.
Not to bad looking eh?

[StinkinLincoln]

So its a 100% direct bolt-on for my 93 EX???

[Accrdwgnguy]

So its a 100% direct bolt-on for my 93 EX???

Uhh yea, you already have a bar don't you? haha

Make sure you get the brackets too, they are different.

I put the vigor bar on my wagon, it follows thru turns sooo much better now.

[StinkinLincoln]

Uhh yea, you already have a bar don't you? haha

Make sure you get the brackets too, they are different.

I put the vigor bar on my wagon, it follows thru turns sooo much better now.

yes I already have a bar on my EX......lol

I was just wondering what all parts off the Vigor do I need?? Rear Sway Bar and??

[cleanjdm]

yes I already have a bar on my EX......lol

I was just wondering what all parts off the Vigor do I need?? Rear Sway Bar and??

just get everything its attached too and you'll be fine. so what ever you need to un bolt to get the bar off, those brackets too

[wed3k]

i took my vigor one off and threw it under the porch. progress or bust.