Rear Toe Adjustment bolt stuck...

[GunRunner]

So I'm installing my Type-2's and my Megan Rear Lower Control & Toe Arms.

Everything is out except the toe bolt on the chassis. I even dropped my rear sway bar to get more work room, hit the bolt wth a hammer, still got nothing.

Ideas


Bolt #31


pics..

[C91BLX7]

Get some penetrating spray.

[GunRunner]

Get some penetrating spray.

I soaked all the nuts/bolts with PB Blaster 2 days ago. All the other nuts/bolts came off with very little effort on my part.

[1990Ex]

take a pic

[GunRunner]

take a pic

added Honda parts pic to first post. actual picture in a few.

[C91BLX7]

What do you mean stuck? The nut won't come off, or its stuck in the bushing?

[GunRunner]

What do you mean stuck? The nut won't come off, or its stuck in the bushing?

the nut is off...the bolt won't rotate or slide. so STUCK! haha

[1990Ex]

use anopther bolt to hit with a hammer

[1990Ex]

or a use a REALLY BIG FUCKING HAMMER

[bruno8747]

Common problem with that bolt. Try heating the bolt without burning the bushing. If that does not work you will have to cut it off and get a new arm.

[slammed4thgen]

or a use a REALLY BIG FUCKING HAMMER

x2!

beat the piss out of it and then get a new bolt if needed!

[GunRunner]

Common problem with that bolt. Try heating the bolt without burning the bushing. If that does not work you will have to cut it off and get a new arm.

I'll try heating it. I already have a new arm (megan adjustable) to go on it.

[bruno8747]

I'll try heating it. I already have a new arm (megan adjustable) to go on it.

Even better for you, Take out the entire rear sub frame. Its only a few bolts and you will be able to drop it right out.

Take out the long bolt that goes across both arms and through the rear knuckle on both sides, then the 17mm ones on the frame. That way you can cut the bolt out easier.

[GunRunner]

Take out the long bolt that goes across both arms and through the rear knuckle on both sides, then the 17mm ones on the frame. That way you can cut the bolt out easier.

already there my man.

[GunRunner]

update....

Came out this morn and pounded with a hammer. Nothing.

Dropped the rear sub frame and sawwed the bolts off.I just got back from Lowes hardware witrh some grade8 nuts and bolts. I'll make an install thread later.

Back to work.