Chassis Tech UCAs

[JDMCB3Si]

Any feedback on these?? HAs anoyne used them. I saw ronald had some but I didnt eve see them installed one the car nor did he mention how he liked them. Let me know.

[slammed4thgen]

he did say they were longer than oem which will cause them to hit the inner well.

[Granite CB7]

I wouldn't even bother, the set I had over 2 yrs ago were not even close to tucking inside the shock tower pocket. I think they tweaked the design alittle bit, but still will require some modding.

[Tnwagn]

If JSpeed is going to release their UCA's I'd look into them.

http://www.cb7tuner.com/vbb/showpost...&postcount=875

[Granite CB7]

^Good post, dimensions look really good!

[Tnwagn]

Yeah, the JSpeed units look freaking awesome!

[slammed4thgen]

Yeah, the JSpeed units look freaking awesome!

hell yeah, i want!

when are they thinking of releasing?

[wed3k]

with the upper balljoint furthur in towards the chassis, wouldnt that induce more negative camber?

[slick]

with the upper balljoint furthur in towards the chassis, wouldnt that induce more negative camber?

same thing i was thinking. they look really good but i wouldnt want more negative camber for them

[Tnwagn]

I'm sure with the adjustability you could get within OEM spec. Maybe not down to 0*, but certainly close enough to -1* not to cause any problems.

You'd have to ask Ronald about availabilty (or if these are ever going to be production units for that matter). I'll PM him to let him know about this thead and see if he can fill us in on that and the other questions you all have.

[Ronald_Type-R]

with the upper balljoint furthur in towards the chassis, wouldnt that induce more negative camber?

same thing i was thinking. they look really good but i wouldnt want more negative camber for them

Good call guys!

These are made specifically for my setup because I will be running the BB6 front knuckles, and you all know that these knuckles will bring my camber back to 0 even with my current ride height. I don't want to lose my -3 degree of front camber!

These UCAs were never intended to correct camber the right way lol but they are good for adjustments from -4 to +2 degree of camber. The thing about going positive is that the ball joint will go past the arm itself, and you can only adjust it to a point where the ball joint won't hit the inner fender..

Bottom line, if you're doing a 5-lug swap using BB6 front knuckles and want to keep your negative camber without the arms hitting your inner fender, then these are definitely for you...But if you want UCAs that will correct your camber the right way, these might not be the best choice! And for the price, you'll definitely want to look at other options

Hope this helps!

Ronald

[slammed4thgen]

Good call guys!

These are made specifically for my setup because I will be running the BB6 front knuckles, and you all know that these knuckles will bring my camber back to 0 even with my current ride height. I don't want to lose my -3 degree of front camber!

These UCAs were never intended to correct camber the right way lol but they are good for adjustments from -4 to +2 degree of camber. The thing about going positive is that the ball joint will go past the arm itself, and you can only adjust it to a point where the ball joint won't hit the inner fender..

Bottom line, if you're doing a 5-lug swap using BB6 front knuckles and want to keep your negative camber without the arms hitting your inner fender, then these are definitely for you...But if you want UCAs that will correct your camber the right way, these might not be the best choice! And for the price, you'll definitely want to look at other options

Hope this helps!

Ronald

thats exactly what i want! lol

i need more neg for the front, it just isnt enough...

[slammed4thgen]

fuck i wish we had more info on these...

and i wish they were easier to order.