upper ball joints????

[cb7dazz]

Hey guys, ya the SPC kit I got was expensive. $300. But worth it. I did have to modify the strut towers to clear but the car drives straight and there is no tire wear whatsoever. The Napa part number for the Bjs is 101 2926 if u have factory control arms and 101 2980 if u have after market arms. The parts are made by Ultra 8 Performance so I don't know if u will be able to get them in the US. But if u know of anyone that lives near the border they can be delivered to a Napa just across the line. Good luck.

Thank you sir for your usefull information. Wow you actually cut the tower, thats sick.

[rudeboy5]

my boy is going to cute mines out too. That's a good job. But I feel you on that. Why buy the whole thing when you can pay a third. I already have a camber kit too. But I really can't afford the spc either. I wish

[Chirs190E16v]

I just got some junkyard control arms for $50 for 2. Or just buy the adjustable ones and make sure they sell replacement balljoints.

[9threeEX]

There was a thread on this in 1 of the other forums, I think there was a list of matches and part #'s for just the upper joint ---
Rear no, Front yes. Moog carries them, as well as a Parts Master line. Altrom Canada also carries them.

I can try to get part numbers from work. give me a few minutes.

Here are your part numbers:

Lower front ball joints:
Moog K9643
HONDA OEM 51220S84A02
SPICER 5051162
ACDELCO 45D0102

Upper ball joints
MOOG K90490 (Ball joint only)
SPICER 5021010 / 5021009 (Control Arm)
ACDELCO 45D1009 /45D1010(Control arm)
ACDELCO 45K15002 (BALL JOINT ONLY)

[cb7dazz]

^^^^^ dam thats useful info right there


thanks a lot bro

[bobbycos]

found some numbers for the rear upper arms with ball joints

left side
Moog K80357
Spicer 5021030
Beck/Arnley 101-4374


right
Moog K80356
Spicer 5021029
Beck/Arnley 101-4371

hope this helps