race axles

[f22hafler]

I'd like to purchase a set. Whats good for a cheap price? Sorry if this is in the wrong thread!

[prNonVtec4u]

what engine setup r u running?

[mozzandherb]

Theres a company here that builds good axles, if you want I could send you there number...I have them on my setup h22 turbo and theres a lot of people around running with them and they hold up really well

[preludeman92]

My tuner swears stock honda will hold up to about 500whp on a turbo car running 10.5" wide drag tires. I didn't believe him until I saw it happen with my own eyes over the weekend. They won't snap, but they will start to click after a weekend of drag strip runs. He convinced my buddy that just had him build/tune a 460whp turbo h22 prelude to run stock axles. He said they'll never break, and if they do, they're lifetime warranty.

[f22hafler]

what engine setup r u running?

Stock H22A with boltons

[f22hafler]

Theres a company here that builds good axles, if you want I could send you there number...I have them on my setup h22 turbo and theres a lot of people around running with them and they hold up really well

Yah I'll take the #. How Much?

[Gettin_faster91]

Stock do hold up very well. But drop the clutch one to many time and the will snap! Just my two cent's.

[f22hafler]

My tuner swears stock honda will hold up to about 500whp on a turbo car running 10.5" wide drag tires. I didn't believe him until I saw it happen with my own eyes over the weekend. They won't snap, but they will start to click after a weekend of drag strip runs. He convinced my buddy that just had him build/tune a 460whp turbo h22 prelude to run stock axles. He said they'll never break, and if they do, they're lifetime warranty.

I have lifetime warranty's on now and its my 4th set. Not saying they don't hold up tho, they go through some serious beating, daily!!!

[C91BLX7]

Stock do hold up very well. But drop the clutch one to many time and the will snap! Just my two cent's.

I do burn outs from a stop mashing the pedal and nothing has happened yet (191k miles on the car, not sure but axels look old)

[Gettin_faster91]

I do burn outs from a stop mashing the pedal and nothing has happened yet (191k miles on the car, not sure but axels look old)

But are you pushing the 400hp that the above Honda's are pushing on stock axles? On a stock motor f/h22's stock is fine.



Quick edit-I have snapped an axle passenger side one to be exact. Lightly modded f22.

[mozzandherb]

Yah I'll take the #. How Much?

Here's the phone numbers

(819) 595-0400
or 1-800-567 9964

Ask them how much it will cost.

[d112crzy]

Dropping the clutch from a stand still is retarded.

Not preloading is retarded.

You guys need to learn how to launch.

Stronger axles will cost you more than they are really worth. Especially for your setup.

[mozzandherb]

Dropping the clutch from a stand still is retarded.

Not preloading is retarded.

You guys need to learn how to launch.

Stronger axles will cost you more than they are really worth. Especially for your setup.

Regardless, if you're at the track and you have a decent amount of power you need some beefier axles

[d112crzy]

Not really.

People have run deep into the 10's with stock honda axles.

It's ALL in how you launch.

[GreenMadness]

i road raced the accord and after 3 track days my driver axle (im thinking passenger also) was toasted, they may handle smooth launches in a straight line... but threshold brakeing with molten tires and they are gone... so it also depends on what you do. i never launch hard, but that doesn't mean my stock a6 cant break an axle, well never an axle (not enough power) always a cv joint.