build up of JDM F20B DOHC VTEC

[fatboy1185]

Figured you would say that, only logical because you seem curious anyhow and even if I told you to go ahead with a muffler, like you would listen.

[fatboy1185]

updated the first page with mod list and prices

[d112crzy]

There's no reason to post until you have your exhaust done.

[fatboy1185]

There's no reason to post until you have your exhaust done.

updating is different than posting

[sackingz123]

Noice. didnt even see this thread.

[fatboy1185]

so as a few of you know my car has been running in limp mode for a while, so its just been sitting. well i've been stumped, and i cant check for codes because my check engine light area is fried for some reason, i changed the bulb twice and it never comes on.

well i have been adding grounds, reseting the ecu, cleaning my o2 sensor, and still no fix.

well i decided to check my injectors, and turns out one of the wires, the solder or whatever tore .... patched that up real quick, fired the car up, and it ran like a boss!!! so i tore around the block like a mad man i was so happy

[bmxicansd]

so as a few of you know my car has been running in limp mode for a while, so its just been sitting. well i've been stumped, and i cant check for codes because my check engine light area is fried for some reason, i changed the bulb twice and it never comes on.

well i have been adding grounds, reseting the ecu, cleaning my o2 sensor, and still no fix.

well i decided to check my injectors, and turns out one of the wires, the solder or whatever tore .... patched that up real quick, fired the car up, and it ran like a boss!!! so i tore around the block like a mad man i was so happy

nice.. post some pics..

[fatboy1185]

nice.. post some pics..

what would you like pictures of

[Father Time]

Glad to hear you found the problem.

[fatboy1185]

Glad to hear you found the problem.

thanks man, it was really bumming me out!! i have no idea how my injector wire came apart.

[HondaFan81]

This cause you to run one cylinder lean, did you damage anything?

[fatboy1185]

This cause you to run one cylinder lean, did you damage anything?

not that i know of. seems healthy now so i dont know.

[d112crzy]

I'd do a compression test if I were you.

[fatboy1185]

Installed a oil catch can today. I mounted it on the intake manifold, so it looks a little out of place, but gets the job done. I'll post pictures tomorrow.

Also ordered a front strut bar, a b-pillar bar, and a c-pillar bar, and......

I ordered 3" piping for my intake, and a BPi flow stack

[d112crzy]

I hope you got a CAI. A short ram WILL hurt performance.