Norcal Project cb7

[90exaccord]

im gonna mod this little sohc f20a and see if i can get power out of this. its already in the car and its runnning fairly strong.

ahh the lil f20 that could lol

[wed3k]

weather stripping? why do you need weather stripping in a track car? lol

i kinda want to take thw autopower out and bring it to someone so they can weld in a full 8 point with my seat bracket attached to the cage so when i get t-boned, the cage doesnt go into my ribs but i also move with the crush.

i paid too much for the autopower so someone can hack it up and start welding on it but we'll see. technically, i dont need a cage until i hit the 11.99's but the stock seatbelts were garbage so i tossed them.

im going to bring the plasma cutter to the door panels and begin cutting everything out, ditch all the side windows. the coilovers are on but it still looks like a 4x4, i need to drop it another 2-3 inches.

do i need horns? fuck the horns.

[TheNextAZN]

lol, remove everything!, if it needs to be put back in, due to regulations/rules... we can fab something up and throw it back in!.. lol

[wed3k]

lol, remove everything!, if it needs to be put back in, due to regulations/rules... we can fab something up and throw it back in!.. lol

thats why i dont want to remove the windows just yet. the auto-x didnt seem to care that we had our windows down and it was fucking baking in there.

lol i had a dream that i scaled the car and it came out to 1950lbs.

[The G-Man]

thats why i dont want to remove the windows just yet. the auto-x didnt seem to care that we had our windows down and it was fucking baking in there.

lol i had a dream that i scaled the car and it came out to 1950lbs.

If you take the windows out you would move into a prepared class. But you should already be in a prepared class since your interior is stripped.

I always run auto-x with windows down. Our region requires at least drivers window down.

[wed3k]

i need to get shorter coilover springs with a bit more spring rate so i can drop it more.

[The G-Man]

i need to get shorter coilover springs with a bit more spring rate so i can drop it more.

You using ground controls?

[wed3k]

You using ground controls?

cusco coilovers non adjustable dampening which bites but anything other than a bilstein or koni yellow isnt worth much to adjust.

i think im going to be upgrading the bushings that are untouched to sperical bearings because it will only see track. hardrace is my only option however i found that it is kinda hard to order and communicate with them.

however i still need to get my 5 point harness and kirkey drag seat installed.

[TheNextAZN]

If you take the windows out you would move into a prepared class. But you should already be in a prepared class since your interior is stripped.
.

Werd. we've already ran it once in E-Prep'd class.

I don't see 1900ish lbs. a hard target.. lol. remember we're getting that hood replaced, and still got all the sound deadening stuff. oh yeh, and the dash!.. lol

[wed3k]

Werd. we've already ran it once in E-Prep'd class.

I don't see 1900ish lbs. a hard target.. lol. remember we're getting that hood replaced, and still got all the sound deadening stuff. oh yeh, and the dash!.. lol

you've ever heard of the people who go to a solid axle in the rear for civics? it saves weight because you dont need alll the trailing arms and suspension. or maybe you do need suspension? idk but thats straight drag racing only. i still want to hit some playdays at the track.

[cali-racer]

track time!!

[wed3k]

wow, didnt know we had a dial bore guage for under two inches so i measured the bearing clearance and it's still kina off.

1. .0014
2. .0012
3. .0015
4. .0008
5. .0005

so number 4 and number 5 housings are a little whack which is weird because i measured the housings without the bearings and they were all cherry.

so it must mean that the bearings may be difference thickness' so im going to have to tear it down and mic the bearings otherwise im going to have to purchase some honda bearings to get some clearance for those last journals.

i kina wanted .0016-.0018 but im going to be running some thin synthetic oil and it isnt going to be a race motor.

probably use a mix of 91 and race gas, shooting for 200whp. i want it built so i can manufacture the ITB's for it. after smog on my DD car, im going to rip that motor out and put this thing in, it's going to be a thumper.

[TheNextAZN]

lol.. what's a thumper? "bambi?"

[wed3k]

think suburu with an exhaust and then put some cams in it. thumper is the sound a cammed 4 cylinder makes. blurp, blurp, blurp...blurp

[almostJDM]

think suburu with an exhaust and then put some cams in it. thumper is the sound a cammed 4 cylinder makes. blurp, blurp, blurp...blurp

just custom make an unequal length header