Norcal Project cb7

[Cb7GHOST]

great, looking toward to seeing this car in action.

[wed3k]

-Supertech valves purchased.
-integra clock installed
-headliner ripped off
-began stripping the sound deadening with dry ice. not much luck
-neuspeed bar on
-finally got the car started with no exhaust system. (it was loud as fuck)
-fixed bouncing idle (FIV)

[palinix]

-integra clock installed

No race cb7 is complete without one of those.... LOL.

Keep the updates coming.

Looking forward to seeing more of your planned motor work getting done.

[wed3k]

espeicially when you got it for free at the junk yard

im procrastinating on the pistons, im going to have them modified with lateral gas ports and ceramic coated.

now that the valves are on their way, i can begin grinding the seats. still need to ask a guy at work to complete the flow bench so i can complete my porting and combustion chamber practice on a spare h23 head and get started on the ACTUAL race head. actual;ly i just remembered...the intake valves are 1mm over so i need to get new seats.

oOoOoO, measured guide tolerance and came out fine. there's only about 8/1000 remaining on the wear indicators for the milling/shaving so im already pretty fucking close.

but yea, slow process but perfection take time
my first motor build and i am shooting for 300crank hp

[wed3k]

just some pics of my work. my practice h23 head is in the back.

[Cb7GHOST]

rent a trailor of course and convince my mom to use her rx300 (already has a hitc, just need the tow ball.)

still debating on the tow dolly or a full car dolly. also if the car breaks down during the track day, then it is all good

i think if the car is not registered, not even two wheels can touch the road.
its just one of those crap vehicle code laws..

[Turbo Dave]

holy mother of god that is clean.

[wed3k]

i think if the car is not registered, not even two wheels can touch the road.
its just one of those crap vehicle code laws..

boss has a full cardolly anyways.

[straightedge]

This thing is gonna be pretty legit. Good job!

[90exaccord]

just some pics of my work. my practice h23 head is in the back.

hey man hook me up i got a H22a4 head that i want to rebuild/port n polish im going turbo on the H

[wed3k]

hey man hook me up i got a H22a4 head that i want to rebuild/port n polish im going turbo on the H

ill see what i can do meng a port and polish will take me probably a month. plus our flow bench isnt set up yet.

update:

received the supertech valves, turns out to be H22 ones. why cant people get this shit right? i should start spoon feeding people but then again i dont work at an insane asylum

[wed3k]

Supertech Valves received
1mm oversize on the intakes

2 tires mounted on si rims (falken azenis), im planning on getting some advan A048's as well.

[Cb7GHOST]

[wed3k]

random update:

im saving about an average of 1.5 gram per valve using the supertech's.
the flowbench does run but i do need an adapter plate of some sort. rollcage is looking to be over 500 bucks. weksos

[shanleycb7]

what kinda cage are you going to use? heres just some random info maybe a lil cheeper here here