intake manifolds

[91cb7h22poss]

you all know that if you wanna get easy horse power out of an f22 you put and h23 IM on instead of stock f22, so is there an intake manifold that i could put on an h23 to get the same effect or is it aftermarket im after?

[sulimed]

one of thesehttp://www.swapshopracing.com/contents/en-us/p5502.html+

or
http://www.blacktrax.net/products/IntakeManifolds.html

[life_shift]

one of thesehttp://www.swapshopracing.com/contents/en-us/p5502.html+

or
http://www.blacktrax.net/products/IntakeManifolds.html

so if in theory putting an h23 IM on an f22 would work, then surely this skunk pro series IM would work on an f22 correct??

[sulimed]

yes. but they preform better on a highly modded engine. on a stock F you mite lose more than you gain.

[91cb7h22poss]

so these skunk 2 mani's are pretty repudable, correct me if im wrong. how big is the intake hole and the runners?

[stretch JDM]

i think the issue with these is the fire wall clearance.they do look rather long.

[life_shift]

yes. but they preform better on a highly modded engine. on a stock F you mite lose more than you gain.

my head is going to have some goodies put in this year as well as a port and polish and tune hopefully so we will see how this goes.

[BIGsnorlax]

Also with that skunk 2 intake, your really only going to gain on the very tippy top of your power band. Over at honda-tech, they seem to lose a bit of power and grunt down low and in the mid range RPM's.. but produce up top ( 7k and onward ) in my opinion... not worth it.

[Accrdwgnguy]

The Skunk2 Manifold will only fit the H22.

The ugly ass OBX manifold is the only aftermarket unit for the H23/F22. Modded H23 IM is as good as it gets

[sulimed]

The Skunk2 Manifold will only fit the H22.

The ugly ass OBX manifold is the only aftermarket unit for the H23/F22. Modded H23 IM is as good as it gets

if you took the time to read the thread, you'd seen the link for the Adaptor plate

[wherm]

Another option I've heard about is using a Euro-R Accord manifold. Probly would need the adaptor plate with that one too.

[F20A CB7]

i think the issue with these is the fire wall clearance.they do look rather long.

Ding ding, we have this prob with obx intake mani on f22 in a cb.

Sidewall clearance, yes it will work with light modification, but also I read something about the holes not all match up or something.

[sulimed]

Another option I've heard about is using a Euro-R Accord manifold. Probly would need the adaptor plate with that one too.

tru

[91cb7h22poss]

i heard about the euro r's but i haven't ever seen one. ever lol

[CyborgGT]

Keep an eye on HMotorsOnline, I see them with used Euro-Rs for sale every now and again.