My First Turbo Build

[KeeleDesign]

honestly they suck on any of our turbo builds, and their tips have a tendency to litterly come off, then you have that bouncing around in your head and combustion chamber... i say no to em, but thats me.

[drummersteve7]

Turbo Problem

the oil feed is pissing me off.

I need a T for the back of the block and stealthmodeperformance was ABSOLUTE ZERO help.
They said it worked perfect got the part and go figure it doesnt fit.
here is the link for the part I bought
http://stealthmodeperformance.com/oil-blockfit.shtml

Anyone have any other recomendations??
do I need to tap the hole and make it bigger?

[zack_odom]

google.

FU lol.

[drummersteve7]

update!

Alright here is all I got left, all front pages have been updated.

Install Oil Dual Outlet and hook up turbo feed line and oil press sensor
Install DX belt for a/c removal
Install Charge Piping with BOV
Install Fuel Pump
ECU Tune PO6 by D112crzy

Only 1 week until my deadline! Basically just waiting on parts to arrive!

[zack_odom]

Werd~~~~
*I'm waiting for vids*

[Father Time]

You are going to be kind of quick there.

Nice job bro, can't wait to see this baby in action.

[drummersteve7]

intake installed

aight intake piping and intake installed. Hooked up to catch can for vacuum!



tomorrow I am going to get the bov ready to be installed on the charge piping, need to do some grinding, i dont need the braket it has on it, pics of that tomorrow!

kinda mad my plug wires came in blue, i dont like color, as most of you can tell from my cars. wire loom on spark plugs sounds funny but Im a lil lady in that fashion.

[d112crzy]

They don't call em NGK Blues for no reason.

[drummersteve7]

argggg

for some reason this oil dual outlet installation was the hardest part for me to install, everything else has been smooth up to this point. I noticed I havent even used any swear words, well now I have.

anyways oil feed and return and oil filter INSTALLED!

here is the pic, still have a spot for a gauge later on...

[d112crzy]

I hope the pass is good this week....

[DraZtiK]

for some reason this oil dual outlet installation was the hardest part for me to install, everything else has been smooth up to this point. I noticed I havent even used any swear words, well now I have.

anyways oil feed and return and oil filter INSTALLED!

here is the pic, still have a spot for a gauge later on...

i'm hoping the oil line isn't bent like that... that might cause some problems!

[drummersteve7]

bent oil lines...

yah it is bent, but should be a ok, its a small bend, looks bigger than it is, damn chrome, I got a new one on the way so I def noticed that.

It looks like this side must have been used on the turbo side, i added a 90 degree angle so the hose wouldnt be pinched at the turbo.

[starchland]

if you could route that oil line so it isnt pinched nearly as much that would be of great benefit

[zack_odom]

lool....So are you done yet Steve?

[drummersteve7]

almost done

pretty much waiting on IC piping fuel pump and a tune!

then everything will be ready to rock, hopefully by this weekend. I put extra money down so the parts would arrive in time!

Trying to get friday off work as well, Ya D112crzy im still workin on the day off, hopefully it happens.