Turbo engine build (pics)

[prodigymb]

more pics

So today I got some more time in with the engine...
- Installed the pistons/rings/rods
- Installed the Toga high volume oil pump which fit perfectly
- Got pissed as shit at the OBX oil pan because it did not fu*kin fit

Toga High Volume pump


Block with the pistons, mmmm


Closer look

[sonikaccord]

Your leaving the head stock?

[prodigymb]

Your leaving the head stock?

changing the cam but thats about it.

[Mike]

nice shitt

but yea are you skipping the sleeves?

[prodigymb]

yea i sold the sleeves and the blockguard.

[HondaFan81]

Cool project and pics. I have the TOGA high-volume oil pump too, glad to see someone else use it. I also am getting the TOGA HP main and rod bearings as well. Anyhow, what are you doing about the OBX oil pan issue and how does it not fit specifically?

Thanks.

[prodigymb]

Cool project and pics. I have the TOGA high-volume oil pump too, glad to see someone else use it. I also am getting the TOGA HP main and rod bearings as well. Anyhow, what are you doing about the OBX oil pan issue and how does it not fit specifically?

Thanks.

Obx pan looks like a nice piece but the holes do not align with the studs so you cant even bolt it on. also the oil pickup that they included does not fir either. I dont know what im gonna do with it because i bought a little while ago

[Mike]

sry if u allready said it...but i didnt see it,,,, how much psi are you going to run

[prodigymb]

17-18 pounds

[prodigymb]

more pics

Cleaned the head


Made the obx pan fit


Obx actaully look decent


Got 6 Defi 60mm guages and D-Link controller
Boost, EGT, Oil Prssure, Fuel Pressure, Oil Temp, Water Temp


Defi boost gauge


Dremelled the crap out of my old A-pillar which was amde for 52mm gauges to fit the 60mm

[F22A6X]

wow man. idk what else I can say. your setup should be making some decent numbers when complete. didn't you say a few posts ago that everything bought was about $2,200? thats a few hundred shy of a good H swap. well anyways keep up the good work.

[i97supratti]

Freaking nice man. Are you doing the labor yourself or having an engine shop do it? You'll have to get one to sleeve the block later on right, so you might as well wait til then to install this stuff.

EDIT: I read it again and I see you are not getting it sleeved. Still wondering if you are doing the work yourself tho, if not, how much are you paying for labor?

[kamaccord]

Hondafan, The turbo build looks excellent. Those gauges are very nice also. What turbo do you plan to use? Regardless, great job. Keep us posted.

[prodigymb]

Hondafan, The turbo build looks excellent. Those gauges are very nice also. What turbo do you plan to use? Regardless, great job. Keep us posted.

Im still using the Evo3 Big 16g turbo I had on there before for now. This is getting done in the shop i work at and the work is done by the owner and myself.....thats is why this is takin a while, i dont really have much time for it. Ill try to get it done and in by the next weekend.

wow man. idk what else I can say. your setup should be making some decent numbers when complete. didn't you say a few posts ago that everything bought was about $2,200? thats a few hundred shy of a good H swap. well anyways keep up the good work.

yeah thats true. but even before the build my car was way faster then an h swapped accord with bolt on mods.

[Ilikebigbutts]

would you happen to have a dhracing piston with a stock one side to side so we can compare ringlands?Nice build btw.

ILBB