To make this short-n-sweet, I'd like to hear some suggestions about internals to use on my motor rebuild project.
It's an H23A1 block with an H22A head. I plan to supercharge the motor and force at least 15psi or more. So basically, I NEED to build a bullet-proof motor here or "motor go BOOM!"
I'm mainly concerned with the crank, rods, cams, and may also change the pistons (it's currently got type-s pistons with 11:1 comp.).
Does anyone have any recommendations from what they have used in the past that worked perfectly. I won't have the exact specifications of what I need until the motor is blueprinted and that will narrow down my choices big time, but just in general, what companies have you guys used and had EXCELLENT results?
It's an H23A1 block with an H22A head. I plan to supercharge the motor and force at least 15psi or more. So basically, I NEED to build a bullet-proof motor here or "motor go BOOM!"
I'm mainly concerned with the crank, rods, cams, and may also change the pistons (it's currently got type-s pistons with 11:1 comp.).
Does anyone have any recommendations from what they have used in the past that worked perfectly. I won't have the exact specifications of what I need until the motor is blueprinted and that will narrow down my choices big time, but just in general, what companies have you guys used and had EXCELLENT results?
Comment