motor is jumping like crazy

[93_f22aky]

so as i pull out on a road there was a nice m3 comeing so i get on it to show him whats up and smack. then a lot of poping nocies so after i leave him behind and he turns i pull over and take a look axles look good but my engien is jumping like crazy i mean i can make it more atleast 2 to 3 inches with one finger. so i no my motor mounts are shot but i am leaving for basic in 10 days so what do u guys think a set of oem mounts would cost me and how hard to put in

[Granite CB7]

I would not suggest you buy a set of stock mounts, it'll just happen again. I'm assuming you have no form of a torque/front mount, what I would do is fill your sides and rear mount w/ urethane:
http://www.cb7tuner.com/vbb/showthre...light=urethane
http://www.cb7tuner.com/vbb/showthre...light=urethane

Not sure what you have for a rear mount, but you'd want the DX/LX 5 speed mount w/ bracket. That's what I would do aside from going aftermarket.

[93_f22aky]

ya no front mount but i am about to leave in 10 days for basic training and then like 38 weeks of ait so i wont have time mess with my baby

[Granite CB7]

^ya, I def. understand your situation! But it would be such a waste for you to throw in a whole set of stock mounts, when they will just give out again, then you'll be in the same exact position again! ESP could def. set you up or DIY I guess. ESP is much more $, no downtime, DIY is wicked cheap but alittle more work, less work if you get a hold of some junkyard mounts, regardless of condition.

[93_f22aky]

ya man i think i am just going to leave well enogh alone till i do my comepleat engein build with my 40k bonus

[SleeperSEDAN]

Esp sells only side mounts for 190.. I'm using a solid homemade torque mount and all stock mounts on my setup...

[LoDollar92LX]

id def fill them with urethane, ive got my 2 side ones filled, and i made a solid rear out of some flat stock, and my motor does not move at all...

the rear mount is no fun to get to though....thats gonna be your biggest struggle.

[drummersteve7]

Esp sells only side mounts for 190.. I'm using a solid homemade torque mount and all stock mounts on my setup...

Please read the ESP Motor Mount thread in members shops.
Alex (91Accord-LX) has proven why it is bad to do just ESP side mounts.
He has pictures on how the stiffness will kill your other mounts.
If you are going ESP, you need to go all the way around!

Thank you, that is all!

[h22sparkle]

Once you fill up your motormounts with the mcmaster urethane 94 shore you wont even need to change your mounts again . And its so strong and durable you wont even need a front dogbone mount. Which leaves you more engine bay clearance. I did it on my last 2 cars.

[93_f22aky]

i got new mounts from drummersteve and i am going to do chesses diy for a front mount

http://www.cb7tuner.com/vbb/showthre...ht=front+mount

[drummersteve7]

did you get those mounts in yet?

makes a world of difference, esp with boost!

[93_f22aky]

got them in today my macanic had a hart atack yesterday and i dont think i can get the back one on thow


i did get my new front mount on it looks nice