I have a local honda guru that is going to Chip and mod a P06 ECU for me. With a Spoon chip too! He says its 200 bucks everything in, all modded, all firmware on it, and everything mapped for my mods. Also he will be playing around with the injectors to get me a bit more power, possibly even upgrading them to the DSM injectors.
Everything im upgrading is as follows:
H22 I/M
A6 Camshaft or aftermarket, not sure yet, need imput on this...
the exhaust header i have on already
short ram intake
With this kinda stuff i SHOULD be able to punch 160 at the wheels correct?
Ive seen other people chip it alone and get about 140 on a Stock A1, and with these upgrades, i should get some fine results.
Gimme some imput on this;... lemme know what i should be doing (if i should get more parts) or wether i should get different parts.
Thanks
Everything im upgrading is as follows:
H22 I/M
A6 Camshaft or aftermarket, not sure yet, need imput on this...
the exhaust header i have on already
short ram intake
With this kinda stuff i SHOULD be able to punch 160 at the wheels correct?
Ive seen other people chip it alone and get about 140 on a Stock A1, and with these upgrades, i should get some fine results.
Gimme some imput on this;... lemme know what i should be doing (if i should get more parts) or wether i should get different parts.
Thanks
Comment