how do I open the stock p39 bin?

[dbsharp]

I downloaded the "stock p39 bin" from the pgmfi library and I cant figure out how to get it to open in any rom editing programs.
the bin is on this page http://pgmfi.org/twiki/bin/view/Libr...efinitionCodes
I would like to view the stock map but how?

[bruno8747]

I never got it to work either. I think the bin could be wrong. I tried crome and uber's.

[dbsharp]

there appears to be another p39 bin I just found further down the page and it works. Are these bins really stock bins? I looked at the h23 bin and the f22b bin and the fuel maps just dont look right. The timing on these are a little different too. I would think that the timing on the f22b and the h23 stock bins would be very similar.

[d112crzy]

I've never got any of the accord bins to open up either.

But either way, don't pay attention to the fuel maps.

Unless they are maps already touched up by someone, no one can read the fuel maps on accords/preludes yet. Only timing.

Care to send me the h23 and f22b bins you have?

d112crzy"at"msn.com

[dbsharp]

im assuming that this is where I should get my timing to start with while tuning.
all the bins I have are from here
http://www.xenocron.com/bins/
or here
http://www.pgmfi.org/twiki/bin/view/...efinitionCodes
the p39 stock map I found is pretty far down the page and is named p39-n01-f6.rom, you can find a h23 stock map on there too.

[prNonVtec4u]

should be p39-n50...

[dbsharp]

p39-50 doesnt work for me. is there a difference in the p39-50 and the p39-n01?

[prNonVtec4u]

JDM F22B(DOHC Non-VTEC) & USDM F22Bx(SOHC VTEC)...



ps. it don't work 4 me either