Supercharger for USDM 92-95 H22a1

[FJACCORD]

Hi guys,
Anyone know where i can get a supercharger for USDM 92-95 H22a1??

[yellaboi]

The supercharger for 97+ prelude will fit the engine but it will not fit in the car if you have a 92-95 prelude or 90-93 accord. I don't think it will fit in 94-97 accords either but not sure.

There's not enough clearance in the engine bay for it to fit.
HTH.

[h22accordaz]

Mmmmm... I wish there was the room sooo bad though! I would do it in a heartbeat!

[Mike]

u can put a notch in the firewall i think.....i dont know exactly wat to do but i know theres a way to make it fit. there a post about it somewhere i saw it like a couple mounths ago i think

[yellaboi]

firewall, brake master cylinder/booster, strut tower.

all in the way!

[Mike]

both centrifical and roots wont fit??

[h22accordaz]

I think that I briefly looked over the thread you are talking about! I think somebody said a centrifical one would fit if you custom made the bracket... I think! Don't quote me on that...

[Mike]

yea i know there was a post about a 4th gen with a superchager im not shure if it was roots or centrifical ...i looked for but coulndnt i find it

[ray ray]

we are working on this now, i might have to notch the fire wall and a few other things, but we are going to make this work. ill keep you guys posted.

[Mike]

I think that I briefly looked over the thread you are talking about! I think somebody said a centrifical one would fit if you custom made the bracket... I think! Don't quote me on that...

i found this in a thread i made a little while ago (lamsz)-Something like a Vortech, or Paxton would work, which are centrifigul. Just think of a centrifical as an accessory like an alternator. You can mount it inline with the accessory belt. You could mount it anywhere. Just make your self a bracket. I'm actually surprised that there isn't at least one Accord, as all that is really required is a custom bracket, different accessory belt, and some plumbing...................................this is prob wat ur talking about....i was talking about a differnt thread but this one basicaly proves it too

[Mike]

we are working on this now, i might have to notch the fire wall and a few other things, but we are going to make this work. ill keep you guys posted.

centrifical or roots?

[h22accordaz]

Yes that is the post I was talking about! Ray! How could you keep this a secret from me! Haha, j/k... I will talk to you when we go to SCO!

[yellaboi]

a vortech would work but there is not a direct fit vortech kit for h22 that I know of. but a civic or integra one could be altered to work. But the cost of the supercharger and cost of fabrication to make it fit would get you a good turbo kit. Or get you a DSM setup 16g setup and have money left to build the engine.

vortech is expensive

I did know a guy a while back that was working on a procharger setup for h22 but I haven't kept up with it.

[h22accordaz]

The whole reason we want a supercharger is because not everyone has one, and because we don't want to do a turbo setup... The money it would cost to build an H22 for turbo would not be less then a supercharger... The H22a compression is 10.6:1..... That means we would have to buy low compression pistons, and for that we would have to sleeve the block which costs about $1,100 to do right...

[FJACCORD]

Well, the whole reason i want a supercharger is cuz i want my swap to last a little bit longer. My swap will be done week following thanksgiving. Wish me good luck. My baby will finally have some balls...