F22a Valve lash with bisi valvetrain?

[Accordtyper91]

hey guys i have bisi springs and retainers and was just wondering what the valve lash settings are. If it is the same as stock then what is that im having trouble finding a reliable source.
thanks guys

[OldMan'92Accord]

best thing to do is call Bisi...but the stock specs are http://www.cb7tuner.com/vbb/showthread.php?t=55330

[Jccck]

When my cam arrived, it came with a bunch of paperwork for the install

It definantly said 8-9 thousands of an inch on Intake and 10-11 thousands of an inch on Exhaust

I ordered a Level1.2 Turbo Cam, could be different for you.. Idk

[Accordtyper91]

sounds good guys thanks for the help

[turbo90accord]

if you only have springs and retainers then you set it to stock. the only time you should deviate from that is if your cam (aftermarket) specifies different values to set the lash to.

[Accordtyper91]

Ya im running the Bisi stage 2 so i will have to give them a call

[Granite CB7]

I know for a fact that Bisi uses 9 intake 11 exhaust for his F22A, that came straight from HondaFan.

[turbo90accord]

9 and 11 what? i take it that mean thousandths but need to be more clear for the newbies that come across this info.