Hi guys im kinda in a jam while trying to instal a aftermarket header on my 91 ex with "AC" it seems that the ac hose is in the way......dose this have to come off? thanks
Announcement
Collapse
Please DO NOT Post In The General Section
From this point on until otherwise briefed, posting in the general section of Performance Tech is prohibited. The only thing to remain here will be the stickies. We would just delete this section, but that would cause unintended results.
The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.
For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.
Everyone will get a couple of warnings from here on out, after that I just start deleting threads.
Again if you have any questions, PM me or one of the other mods.
The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.
For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.
Everyone will get a couple of warnings from here on out, after that I just start deleting threads.
Again if you have any questions, PM me or one of the other mods.
See more
See less
ebay header instal
Collapse
X
-
probably if you pull off the header from the bottom you wont have to worry about that.What makes me laugh about forums, is that no matter how much you try to help someone, they dont take the advice. Go ahead and do it the hard way.
You got to respect what you drive, and appreciate what you have, making the best of what you got. and if that means putting CAI, HID's, a phat stereo system, and a idiot in the drivers seat...then so be it!
Retro!
Hater
I love nooBs...They make me look good
-
Just delicately flex it out of the way. You shouldn't have to move it much to get your header in there. If you disconnect it you're violating some EPA laws and could cause a serious freeze burn from the temperature of the refrigerant that's coming out. I don't know that you can fit the header up from the bottom as previously mentioned, but you can try.
Comment
-
The aluminium flange and pipe that connect into the flexible hose ARE in the way
You WILL have to remove that flange/pipe to install the header
What i did was refabricate the flange so the pipe exit was on an angle, which with the hose attatched misses the header by about 20mm
You could do the same, or just lose your AC.. I'm Aussie, AC isn't optionalBuilt & Boosted.
Comment
-
Originally posted by Shag Wagon View PostHave fun gettin those downpipe nuts on the header!What makes me laugh about forums, is that no matter how much you try to help someone, they dont take the advice. Go ahead and do it the hard way.
You got to respect what you drive, and appreciate what you have, making the best of what you got. and if that means putting CAI, HID's, a phat stereo system, and a idiot in the drivers seat...then so be it!
Retro!
Hater
I love nooBs...They make me look good
Comment
Comment