prelude oil cooler

[d112crzy]

All h/f water pipes should interchange into the blocks. The differences lie in the shape/length.

Just go to a junk yard and snag the water pipe from an a6.

[sulimed]

but the A6 pipe doesn't have the nipple (hehe nipple ) for the coolant to feed back in to the system. so ether way your going to have to weld something.

[preludeman92]

Really? How the hell does the f22a6's cooler work?

Pics from an f22a6 powered member please!

[sulimed]

the a6 dosen't have one.

[C91BLX7]

the a6 dosen't have one.

Last time I checked they did.

[sulimed]

from this thread
http://www.cb7tuner.com/vbb/showthre...ighlight=build

[bruno8747]

The A6 DID come with an oil cooler, The block pictured above is a A1 block or similar. There is a fitting that screws onto the block that the coolant returns to its fits into that port to the left of the oil filter on the block.

[sulimed]

Finally got all my parts from DH-Racing......2 months later. Here is the list of things I am putting in the engine [f22a6] and few pics, ill post more pictures of other stuff later on.
DH-Racing 9.5:1 forged pistons 85mm
DH-Racing forged and custom bushed I-beam rods
DH-Racing wristpins
DH-Racing piston rings
Fel-Pro Permatorque MLS headgasket
Toga high volume oilpump
Toga high performance main & rod bearings
5.5 Quart OBX oilpan
Walbro 255 lph fuel pump
ARP Head studs
Polished crank
Honed cylinder walls

DH-Racing piston and rod


Polished crank


DH-Racing piston rings

IDK

[bjaccord]

I had an a6 block and it had no cooler on it either.

[sulimed]

well..... this should be rapped up friday. i took a f22a waterpipe up to a shop around the corner from me, and it's going to coast me $40.00 to get the nipple from the h23 pipe welded on the the f pipe.

once i get that, and a few other items. i'm hoping to start putting the eng together. i'll post up a few pic

JDM f22b head
F23 block
an OVER KILL of bolt on's and upgrades

[preludeman92]

Is it a stock f23 block?

[sulimed]

yea. haven't got as far as you just yet. over the winter i build another block and boost. k24 pistons and all

[ph0en1x]

I had an a6 block and it had no cooler on it either.

My 91 SE has an A6 block and it has the cooler on it. I thought all A6 blocks did.

[HondaFan81]

well..... this should be rapped up friday. i took a f22a waterpipe up to a shop around the corner from me, and it's going to coast me $40.00 to get the nipple from the h23 pipe welded on the the f pipe.

once i get that, and a few other items. i'm hoping to start putting the eng together. i'll post up a few pic

JDM f22b head
F23 block
an OVER KILL of bolt on's and upgrades

What compression will this be at? Seems like a close setup to piratemcfred.

[sulimed]

What compression will this be at? Seems like a close setup to piratemcfred.

not really sure. the heads been milled for trueness and i'm taking out the middle layer of the head gasket.

the stock comp for the f22b is 9.2, and the f23a1 is 9.3....so