My dome light doesn't come on when I open the doors regardless of what position the switch by the light is set to (except in the manual on position obviously, so I know the bulb works). I'm guessing I have a disconnected or cut wire somewhere. Any idea where this might be? Thanks!
-
-
two things i can think of
1. older hondas have shitty door pins. open a door and youll see the pin switch near the latch, often they get rusty or gunked up and no longer work. remove them (1 screw and a wire plugged into the back) take a wire brush and some wd40 and clean em up as well as the hole it screws into. ive had to do it several times when doing alarms
2. could be possible the switch in the domelight is screwed up.FA1
355
Comment