Announcement
Collapse
No announcement yet.
Intersection Light Harnesses
Collapse
X
-
Originally posted by Extacee View Post
Well it plugs into your fuse box (+)
Also bolts onto your foglight ground bolt (-)
It will then plug into your turn signal harness, via a jumper plug I made.
Then there is wires that output to your intersection lights, but you have to wire those.
Not hard at all, Ill label things
Hope this helps!
Only thing is that youll have to zip-tie the relay up in the dash to hide it.
Ill post a video up once I wire up this relay lolLast edited by CB7Man; 03-31-2010, 06:06 PM.
Comment
-
Originally posted by CB7Man View PostOpps sorry man,
Well it plugs into your fuse box (+)
Also bolts onto your foglight ground bolt (-)
It will then plug into your turn signal harness, via a jumper plug I made.
Then there is wires that output to your intersection lights, but you have to wire those.
Not hard at all, Ill label things
Hope this helps!
Only thing is that youll have to zip-tie the relay up in the dash to hide it.
Ill post a video up once I wire up this relay lol
OH YEAH, put me down for one of these. i need one since i have the intersection lights installed but not working.
Rip It Up
Sold to: nightime25, MyDianaz06, Accord214 and 408cb7
Bought from:Rob_is_Legend, MonoCB7, Fatboy1185, Flatline and busak87
i vouch for my Brothas
Comment
-
Installation looks simple
The positive wire goes to the fusebox near the driver's feet. One of the terminals down there supplies constant power, slide the spade terminal onto that.
The ring that goes to the foglight ground can basically go under any bolt with shiny metal underneath to provide a good ground
For the turn signal jumper, just unplug the connector for the turn signals under the dash, and plug and one side of the jumper goes to each of the two sides of the connector. I'd sorta prefer to wire them in as corner lights, but that's just me.
Comment
Comment