so the other night when i was cleaning my basement, i found a whole pile of Lexus RX330 headlights that i got as warentee returns when i worked for the lexus dealership. when i had started collecting them, it was just for the HID lights and ballasts. i figure maybe the projectors would fit in the accord lights, so i took one apart (with a hammer cause they are glued permenatly) and found the projectors would work nicely.
using a 2.75 holesaw a hole is cut in the headlight, and light trimming with a dremel results in a good fit.
some trimming of the headlight backing is nessisary
and the final product...not half bad for 3hrs of work and a few beers
i had Lexus HID bulbs and ballasts in my stock blackhoused lights, and this mod was a noticible improvment
using a 2.75 holesaw a hole is cut in the headlight, and light trimming with a dremel results in a good fit.
some trimming of the headlight backing is nessisary
and the final product...not half bad for 3hrs of work and a few beers
i had Lexus HID bulbs and ballasts in my stock blackhoused lights, and this mod was a noticible improvment
to a certain point. And you already passed that point along time ago
Comment