Question For those with HID kits

[GunRunner]

wow this thread is old, but here is where I put mine. Bumper had to be taken off for this, but from the top side there is no evidence of HIDs

[cvc7chris]

wow this thread is old, but here is where I put mine. Bumper had to be taken off for this, but from the top side there is no evidence of HIDs

i need new headlights and i been looking

i was wondering where i could mount the balast thankx!

[Cb7GHOST]

no tank for your windshield nozzles?

[Losiracer2]

I mounted my PS one right where my CAI used to be on the vertical part of the body w/ some hanger strap and some screws, then ran the wires up through that hole for that clean look.

On the DS, I mounted mine under that AC drier or whatever it is, also behind the bumper, behind the windshield washer reservoir. It was def. a MUCH tighter fit than I thought but I managed to do the same w/ hanger strap. I ran the wires through that hole that the AC drier thing has, I just had to unbolt it to run the wires then rebolted it back down. Works like a charm. Can't even see where the ballast is.