Tail Light Problem

[93EX]

I installed a set of gen.3 carbon fiber altezzas and the brake lamp light came on inside the car. Does anyone know why this is and how to fix it?

[jdm91cb]

CHECK ALL YOUR BRAKE LIGHTS YOU PROB JUST BLEW ONE OUT.

[93EX]

I checked all the bulbs, but there were 2 bulbs left over from the stock assembly. There were only 2 places for the reverse lights and nothing else. I think its trying to read the 2 bulbs that aren't there.

[jdm91cb]

HAVE SOME ONE STEP ON THE BRAKES SO YOU CAN SEE AND MAKE SURE THEY ALL GO ON I BELIVE YOU SHOULD HAVE 4 ON EACH TAILLIGHT AND THE THIRD BRAKE LIGHT ON THE BACK WINDOW.

[pax217]

exact same thing happend to me, with the exact same lights.
#1 try reconnecting all cables and wires, that worked for one day for me
#2 fully reinstall them, that worked permanantley for me.

those tail lights aren't very good, and i would reccomend getting some red/clear tails for www.procarparts.com. high quality stuff.

hope that helps a little,
-pax217