How do i wire bumper lights?

[i97supratti]

i want to wire the bumper lights to turn on with my corner lights n headlights n such, and still blink. How can i do that?

[AccordWarrior]

There's green and black on your existing lights, green is +12 signal and black is negative. Go get a corner light socket out of a EG civic. Then hook green to green, black to black and run a wire from the red on the socket to the red on the constant on wire (probably red) on your corner light.

[fliplyricist1]

how many watts are each corner lamp bulbs?

reason being, I want to do this mod, but with single filament, while retaining the blinking feature. I currently have jdm one piece headlights and am not using my parking signal corner bulb...just the constant one. I was thinking of just directly wiring that corner signal lead directly to the positive terminal of the single filament bumper socket, but I don't think there's enough voltage and it'd probably short something (which I don't want)

I have an extra foglight kit laying around and wonder if that'll do it.

Has anyone successfully done this mod on a single filament socket? I don't like howon the dual filament you either keep the brighter filament on and the signal filament is barely visible, or have the brighter filament signal and the smaller filament as the constant, which is too dim and doesn't look good.

[srsskyline]

I heard doing relay will work for using 1156 bulbs..