Originally posted by Losiracer2
View Post
Announcement
Collapse
No announcement yet.
NO CUTTING retrofits!!!
Collapse
X
-
well i got the charger for the camera
pics don't come out as good as real life
d2s based morimoto mini 4300k
driver side only
and here is a video of the color shift and high beams
i aimed the headlights down so that all of the high beams would light up the fence.
the cutoff is at the sidewalk and the fence is about 10-15 feet away from the sidewalk
Last edited by quaidum; 08-07-2010, 09:32 AM.
Comment
-
Oh this is so tempting to do! I can't, or can I? haha
If I already have ballasts and D2S bulbs, I'd only need the projectors right?
member's ride thread
93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
99' Lexus LS400 157k VVTi V8 gets up & goes...new DD
91 Accord SE 176k
97' Honda Odyssey 199k miles...$485 spare van for my parents
Comment
-
Originally posted by quaidum View Postyes that is all you would need to get some bi-xenon(aliens that go both ways) greatness
member's ride thread
93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
99' Lexus LS400 157k VVTi V8 gets up & goes...new DD
91 Accord SE 176k
97' Honda Odyssey 199k miles...$485 spare van for my parents
Comment
-
here is how i mounted them, i had to remove about 2 inches of plastic b/c the original projectors where about 6.5'' and the morimoto's are about 4.5''. If i did not do this the projector lens would sit to far back and not produce as much light out of the housing
i made a piece of plexiglass and polyurethaned it to the housing(been told since then that EDC is better for thermoplatics.
Comment
Comment