NO CUTTING retrofits!!!

[lilb_1979]

just turn them on when they're on the car in the headlight housings and keep them loose so you can adjust them thats what I originally did w/ my TSX retro.

Ok, thanks bro!!

[quaidum]

well i got the charger for the camera
pics don't come out as good as real life

d2s based morimoto mini 4300k

driver side only





















and here is a video of the color shift and high beams




i aimed the headlights down so that all of the high beams would light up the fence.
the cutoff is at the sidewalk and the fence is about 10-15 feet away from the sidewalk

[lilb_1979]

how did you wire up the switch for the high beam?

[quaidum]

well i was just pushing the shield down.
there is a wire that comes from the solenoid that splices into the high beam wires it is very simple i will take some pics and post them up.

[lilb_1979]

awesome!
Thanks!

[Losiracer2]

Oh this is so tempting to do! I can't, or can I? haha

If I already have ballasts and D2S bulbs, I'd only need the projectors right?

[quaidum]

Oh this is so tempting to do! I can't, or can I? haha

If I already have ballasts and D2S bulbs, I'd only need the projectors right?

yes that is all you would need to get some bi-xenon(aliens that go both ways) greatness

[Losiracer2]

yes that is all you would need to get some bi-xenon(aliens that go both ways) greatness

did you have to call the TRS to specially order them? All I could find were the H1 versions on their website. How much more was the D2S version?

[quaidum]

my stage III kit was 315 shipped not sure what it would be for just the projector maybe 135 or 140

i sent an email first talked with matt back and forth and then ended up calling them and ordering mine

[ikayto]

you have to email the retrofit source for the invoice of the d2s mini projectors.

they're $140 shipped in the US without the shrouds, so that's an additional $45 dollars for the gattling guns.

[quaidum]

well i made some progress on one of the lights haven't had time to spend on them

[quaidum]

here is how i mounted them, i had to remove about 2 inches of plastic b/c the original projectors where about 6.5'' and the morimoto's are about 4.5''. If i did not do this the projector lens would sit to far back and not produce as much light out of the housing
i made a piece of plexiglass and polyurethaned it to the housing(been told since then that EDC is better for thermoplatics.

[zack_odom]

they just sold one more set of these haha.
Retro'd Legend here I come!

[lilb_1979]

about to put mine in, gotta cut the screw hole for the bulb reflector first.

[quaidum]

painted plexglass black to make it look a little more clean and mocked up where i might be putting my led strips

deciding on inside the headlight or using them for the bumper turn signals and parking lights similar to the new porsche and mercedes