I recently ordered two feet of green flexible LED strips from Oznium.com
http://www.oznium.com/led-ribbon
here are the results!
I also installed new LED dome lights from Oznium as well... but I didn't take pictures of those yet.
Here's how it was done:
Using a fuse bus...
It comes with a pre-wired positive lead (the red wire) which I ran to a 10amp LED switch...
the LED ribbons came with some pre-wired junk that I had to cut out- they only got in the way.
http://www.oznium.com/led-ribbon
the grounds from the lights run to the switch then to a bolt by the E-brake.
It took a while, only because I screwed up the wiring like a lot.
all-in all, it took about 50ish dollars to do.
the 50 includes the lights, fuse bus, switch and wiring couplers.
oh yeah, and there's this...
shh... the only one that knows I don't actually have vtec is the guy next to me.
http://www.oznium.com/led-ribbon
here are the results!
I also installed new LED dome lights from Oznium as well... but I didn't take pictures of those yet.
Here's how it was done:
Using a fuse bus...
It comes with a pre-wired positive lead (the red wire) which I ran to a 10amp LED switch...
the LED ribbons came with some pre-wired junk that I had to cut out- they only got in the way.
http://www.oznium.com/led-ribbon
the grounds from the lights run to the switch then to a bolt by the E-brake.
It took a while, only because I screwed up the wiring like a lot.
all-in all, it took about 50ish dollars to do.
the 50 includes the lights, fuse bus, switch and wiring couplers.
oh yeah, and there's this...
shh... the only one that knows I don't actually have vtec is the guy next to me.
Comment