Announcement

Collapse
No announcement yet.

headlights???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    headlights???

    ok so i gotta question on wheter anyone has the sylvania silverstar 9006 and if they run em as their low beams....can sum 1 help me i know i've posted a thread about this type of question but can't find it any more plus i need a diy or sumtin so i can swap mine out with the new ones i got
    ~CB7 Phoenix~

    (picture missing help me get a new one )

    The California White Tux
    *and its alive!! hahaha*
    *under construction*M.R.T: http://www.cb7tuner.com/vbb/showthre...=1#post1689652 *changes soon to take over*

    #2
    ive had 9006 silverstars in my low beams for over 3 years until yesterday. if you wanna remove your old ones its easiest to... remove the battery and twist a cap that secures the bulb in place, pull it out and unplug, replace the bulb with the other one and reverse the steps. same goes for the other side, space is kinda tight tho.

    FS: OEM Fuel Filter, ES Tie Rod Boots, Chrome Bulbs

    Comment


      #3
      Does not need to remove the battery unless the person has huge hands and cannot fit in the tight space. I have fat hands and I can get through it with a little bit of scratch , but nothing to bitch about.

      If the lock is stuck get a flathead and keep tapping it until it gets loose.

      1993 Honda Accord LX 2004-2009
      1996 Honda Civic LX 2009-2012
      2012 Kia Optima LX 2012-2013
      2010 Honda Accord EX-L V6 2013-2018
      2007 Honda Fit Sport 2017-2017
      2018 Honda Accord EX-L 2.0T 2018-20XX






      Comment


        #4
        Originally posted by DarkShadow707
        Does not need to remove the battery unless the person has huge hands and cannot fit in the tight space. I have fat hands and I can get through it with a little bit of scratch , but nothing to bitch about.

        If the lock is stuck get a flathead and keep tapping it until it gets loose.
        yup, if you can fit ur hands in there then itll save you some time. also the lock can sometimes be a bitch so do what he said and get a flathead and a hammer.

        FS: OEM Fuel Filter, ES Tie Rod Boots, Chrome Bulbs

        Comment


          #5
          alright thank you guys very much ima be doing that today.
          thanks,
          nas
          ~CB7 Phoenix~

          (picture missing help me get a new one )

          The California White Tux
          *and its alive!! hahaha*
          *under construction*M.R.T: http://www.cb7tuner.com/vbb/showthre...=1#post1689652 *changes soon to take over*

          Comment


            #6
            Originally posted by lo_dit
            the lock can sometimes be a bitch
            YUP!

            Took about 10 mins per bulb for me. 90% of the time was consumed trying to get the old bulbs out. I hate having fat hands...

            1999 BMW M3
            2001 Honda CR-V SE RT4WD
            2005 Chevrolet Tahoe Z71
            2015 Suzuki V-Strom 650

            Comment


              #7
              If they haven't been messed with in a long time good luck, they are a PITA

              make sure to work them back and forth when you take the bulb out so it will be easier next time.
              wat?

              Comment


                #8
                hey yeah thanks u guys i just finished doing mine and they are great it was hard to get the one on the left side because of not just the battery but the lock ring was hard to turn i ended up using a flathead to push on the slots and turn it
                ~CB7 Phoenix~

                (picture missing help me get a new one )

                The California White Tux
                *and its alive!! hahaha*
                *under construction*M.R.T: http://www.cb7tuner.com/vbb/showthre...=1#post1689652 *changes soon to take over*

                Comment

                Working...
                X