dx door panels to lx door panels

[Weezo182]

i have Ex pannels and the fabric is doing the same thing no matter how much glue i use

[birdman86]

yea man im feeling ya, but im not sure if u have to switch out the whole door or not though

[birdman86]

dude just switch out the panels, it will be alot easier than cutting all that stuff

[timmy0tool]

there is a lot of wiring involved in doing such a swap. you can imagine how much there is for power windows. what more with the door locks. unless you have a donor car, having just the door panels will not make it easy. physically the panels can swap over but to make the windows and switches work is another thing.

you can install aftermarket solenoids to power the locks. that could be a start so you don't have to reach over to unlock doors anymore. you may even integrate a separate trigger to control it. there are a lot of ways to do your project.

[bruno8747]

Cant you just switch the doors out and wire up the windows directly from the battery?

[birdman86]

could u just buy 4 ex/lx doors and swap them on?