Removable Steering Wheels

[bmxicansd]

I suggest wiring up a Kill Switch, Getting a Basic Alarm and Quick Release.
Another good quick release is the FET.
Removable steering wheel is nice, but in all honesty you can still drive your car around with no steering wheel.

[h22pwrcb7]

yea in response to what someone said about them stealing ur wheel i plan on gettin the hub lock and putting the wheel in the trunk when im in a rough area other than that just take it inside the house when i park outside by a kill switch are u guys talking about like a battery on off switch hidden some where i know some other preventive measures like taking ur fuel pump relay/fuse out lol

[jdm_inspired]

I suggest wiring up a Kill Switch, Getting a Basic Alarm and Quick Release.
Another good quick release is the FET.
Removable steering wheel is nice, but in all honesty you can still drive your car around with no steering wheel.

Haha I tried that before. Took off the steering wheel while on the freeway to scare people next to me. I ended up scaring myself, I almost lost control haha.

I'LL NEVER DO THAT AGAIN. Dummy me.

Oh and you can't drive the car if you delete your power steering.

[h22pwrcb7]

Go with the short hub adapter from NRG innovations. It doesn't stick out far but mine was rubbing on the plastic trim so I had to cut some of it away.

Here are some pics of my setup with the short hub, lock, and quick release.

hey isnt that the gauge cluster from the accord store

[s2kracer]

Accord store?not sure what you mean

[h22pwrcb7]

www.tasauto.com The Accord Store they sell those exact ones for like 75 bucks

[s2kracer]

No. They are similar but I got mine from www.alfaotto.com. The ones from TAS are cool too though.

[h22pwrcb7]

cool any problems with it?

[s2kracer]

No problems at all. actually they are some of the best out there in my opinion. I've tried other brands that don't quite fit the faces that well or need trimming or tampering to look right. I think they were around $100 bucks when I got them though.

[Mike1357]

So what are the exact parts that would have to be ordered from NRG? And what, if any, custom work has to be done in order to install the hub? Can you retain the horn button? Where would be the most practical place to relocate the cruise control?

[5spd92]

^ im sure most people that use cruise control still have the regular wheel while people that use a racing wheel with quick release don't. i would also like to know to since i do travel and cruise control would be nice. all i can think off is fabing a bracket to the wheel, then bolt the cruise control to it. and use like bullet connectors for the wires, or if possible the male and female connector that can hold the multiple wires, kind of like one plug for all the wires. (sorry dont know exact name)

[s2kracer]

So what are the exact parts that would have to be ordered from NRG? And what, if any, custom work has to be done in order to install the hub? Can you retain the horn button? Where would be the most practical place to relocate the cruise control?

You would have to order two things;
1. a hub adapter ( other brands are available for less money but NRG makes a short version so the wheel is in the stock location.)
2. quick disconnect

The quick disconnect has electrical contacts for the horn and a racing wheel should come with a horn button. If you have a 92-93 I recommend that you swap to a 90-91 gauge cluster because of the SRS light or just remove the bulb. As far as cruise control I deleted mine all together but you could mount the controls to the wheel and somehow make the wires disconnect or mount the controls on the dash.