Center Console swap

[acch22]

Originally posted by hybrid90accord
I tried the e brake conversion and trust me it's not as easy as just un-bolting and moving it over trust me.

what exactly is the hard part?

[hybrid90accord]

The fact that when you move the e-brake over none of the hole match but and you have to drill new hole, but since you can't use a nut and washer it wil not be a solid mount and the ebrake will wiggle, and adjusting the ebrake cables isn't hard but wasn't fun either so I just went from a 90 console to a 92 accord 1-piece console with the e-brake in the middle.

[acch22]

Originally posted by hybrid90accord
The fact that when you move the e-brake over none of the hole match but and you have to drill new hole, but since you can't use a nut and washer it wil not be a solid mount and the ebrake will wiggle, and adjusting the ebrake cables isn't hard but wasn't fun either so I just went from a 90 console to a 92 accord 1-piece console with the e-brake in the middle.

what year is your cb? and you tried moving it over to the middle or to the side?

[hybrid90accord]

mine is a 90 and i tried to move it over to the side cause I bought a 93 console and tried to move the e-brake over and that shit was no bolt on task .

[shawn.hayden]

its easy to move the Ebrake in the 92-93's, not in the 90-91's


92-93 accords had the option to have the center armrest (like the wagon) therefore the holes are there for both side, and centered ebrake position

[AccordWarrior]

Originally posted by shawn.hayden
its easy to move the Ebrake in the 92-93's, not in the 90-91's


92-93 accords had the option to have the center armrest (like the wagon) therefore the holes are there for both side, and centered ebrake position

SSHhhhhhh....that info's supposed to be secret...until I'm done

[acch22]

Originally posted by shawn.hayden
its easy to move the Ebrake in the 92-93's, not in the 90-91's


92-93 accords had the option to have the center armrest (like the wagon) therefore the holes are there for both side, and centered ebrake position

yup, just checked it and it bolts right up in my 93

[4drcord]

DUDE the holes have no nuts on the other end!!!! please help. I see the holes and it fits but the holes have no threads to hold the bolts! ahhhhhhhhhhhhhhhh

[acch22]

Originally posted by 4drcord
DUDE the holes have no nuts on the other end!!!! please help. I see the holes and it fits but the holes have no threads to hold the bolts! ahhhhhhhhhhhhhhhh

what year is ur cb? take a pic if u can

[4drcord]

92. no pic needed, the holes are there! but there are no threads at the end of them!!!!!!!!!!!!!!!!!!!!!!!!!! i hate this

[AccordWarrior]

Originally posted by 4drcord
92. no pic needed, the holes are there! but there are no threads at the end of them!!!!!!!!!!!!!!!!!!!!!!!!!! i hate this

Can you get a tap and a bigger bolt? That would work, wouldn't it?

Or you could just sell your armrest console to me.

[hybrid90accord]

Originally posted by acch22
what exactly is the hard part?

...............................

[4drcord]

its easy as hell as long as you dont run into a problem like me. im going to have to drop the exaust and put 2 bolts down there. i dont even know if i can get to those 2!!!!!!!!!!!!!!!!!!!!!!