Door panel fabric problem

[JohnnyB]

The fabric on the door panels is comming off, I have already tried gluing it back on with spray on adhesive, but it came off like 2 days later. Any suggestions as to what will keep it on?

[chessboxer]

when i did mine, i used this fabric glue which came in a bottle and you actually put it on there like real glue and not like an adhesive spray.
look for it in the crafts section of walmart.

[JohnnyB]

I knew I shoulda gotten the lil bottle of glue instead of the spray on stuff Do you remember what it was called so I don't screw up again? LOL Thanks

[do0dfromcali]

I just used silicon II

Works fine

[Metaluna21]

Mine did the same thing. You might be better off just stripping it off and painting with vinyl paint...works good. Check out my ride in members ride's

[FDAccord]

yeah if you decide to take off the fabric do so now.. i tried to glue it back on and it came off again so i ripped it all off and the glue doesn't really want to come off now.. any suggestions?

[Metaluna21]

Originally posted by FDAccord
yeah if you decide to take off the fabric do so now.. i tried to glue it back on and it came off again so i ripped it all off and the glue doesn't really want to come off now.. any suggestions?

Get some 3M adhesive remover. Usually found in the paint section at WalMart or automotive store. It's pretty potent! Sand the panels after that, mask them off and use some vinyl spray paint. (also found in automotive store) The paint is awesome and it won't peel chip, etc. It seems to just soak in.

[FDAccord]

how much of it do i need, and how much is it?

[Metaluna21]

Originally posted by FDAccord
how much of it do i need, and how much is it?

I only needed one can of it. You might need more depending on how liberal you are. I think it's about $5

[PakaloloHonda]

Or you could just do what I did ..

Mine were hella bad also .. JB, you're in Florida .. fergetaboutit .. lol .. nothin works ..
The guys in Kentucky, and IL. .. have it much cooler then we do .. so yeah.. they wont experiance the same issues we do.

I just bought some nice used SE Leather ones from a junkyard, and put um in .. done deal.

Problem solved .. forever!

A Hui Hou !!!
Tomi

[JohnnyB]

Originally posted by Metaluna21
I only needed one can of it. You might need more depending on how liberal you are. I think it's about $5

LOL yeah thats the main problem with the glue. When it gets hot inside the car (the car is black too) the glue gets tacky and loses its stick. I will try and hunt down some leather ones. I Think I want to convert the interior to leather anyway.

[Metaluna21]

Originally posted by JohnnyB
LOL yeah thats the main problem with the glue. When it gets hot inside the car (the car is black too) the glue gets tacky and loses its stick. I will try and hunt down some leather ones. I Think I want to convert the interior to leather anyway.

Yeah, if you can find the leather, it'd be awesome. If not, the paint looks great if you take your time. You would think my doors were stock if you didnt know better.

[JohnnyB]

Originally posted by JohnnyB
LOL yeah thats the main problem with the glue. When it gets hot inside the car (the car is black too) the glue gets tacky and loses its stick. I will try and hunt down some leather ones. I Think I want to convert the interior to leather anyway.

I'm pretty handy with a rattlecan so I'm not scared to paint. I just like leather and I'd rather do this the right way.

[accordmaniac]

Oct. 2003 my interior has been redone with leather.
Three times.. went in for A/S and still have problem.

So far.. from this posting..
I need to used SE leather.. anything else?
Did SE come with gray leather?

[Weezo182]

ya mine has the same problem