how are you guys attaching your lips to the bumpers? ive tried everything. i put an entire box of self tapping screws in a legend lip and it still came off. I have a 90-91 with a 94-95 legend coupe lip. any help?
-
COUPE K24
-
drill holes and put bolts with washers and nuts..it wont come off
Rush
Originally posted by DarkcloudBought 3 things, 1 that goes boom,1 that shades and 1 to go fasrer
Originally posted by bmxicansd
-
i used bolts, nuts and washers . also did the sides with self tapping screws and lock tite.
A man that keeps looking back can't see whats in front of him.Comment
-
I'm a zip tie user.......lol.....I laugh cause its sad
Comment
-
just use LOCK nuts and some washers. You will not need to use LOCK nuts and LOCK washers. They are like .09 cents each (i work at a hardware store). that is how mine is attached. Never had any issues been on for about 3-4months. Hope this helps!!!Comment
-
Buy a pop rivet gun and rivets.
1990 CB7 - Almost Done - Delta 272, SRI, 2.25 catback, Bisi intake manifold gasket, A6 intake double stacked, H22 plenum, AEM cam gear, F23a block, F22a head, Wiseco K20 pistons, DSM 450cc injectors
2004 Z33 - Brembo BBK, Nismo spoiler, Nismo lip, Nismo shift knob, AEM CAIComment
-
The way I attached a lip to a honda civic involved putting the car on a lift so it was at a good height, lining the whole lip up and laying down some clear silicone then clamping it all in place with like a dozen clamps. Then we drilled holes and tightened nuts and bolts with the largest washers we could fit.
That lip is never coming offBeing normal is probably the lamest thing you can try to beComment
Comment