getting to clips under headlights

[matt92accord]

i just ordered my kit a couple of weeks ago. i was out looking at how to take off the stock front bumper and i noticed something. according to the mantinance book to get to the 2 clips under each head light you need to remove the light. to get to the head light screws you need the bumper off and to get the bumper off you need the light off. i just figured i would adjust the lights all the way up and pry the clips off, but if any one has a better idea let me know

[Maple50175]

All you have to do it take the whole bumper support off. then you can access them and put on your new kit!


theres 2 bolts behind the bumper lights and theres one screw on each side behind the light. Look in the DIY on removing front bumper.


Hope it helps!

[rebels]

smash your headlights apart.. and then take the screws out.. then buy new headlights.

nah, just take the front bumper off like maple said and the screws will be accessible.

with my old fiberglass kit.. i didnt even put the screws under the headlight in.. just below the grille and the clips it slides on to by the fender./

[uncle_el]

front bumper removal diy