M3 mirrors, need help installing

[gnehc1]

my brother bought me some m3 mirrors from ebay. the instructions on wiring are in japanese. anybody installed them before? i'm trying to put them on my 91 accord which has power mirrors. please help???

[lowoctane]

i dont know about them at all, but can you just bolt them on?..and then run a wire from one of your turn signals to them?..iono what they look like, or how they need to be wired...but it shouldnt be too difficlut

[akkordlayinkit]

Im pretty sure that this is a repost, because I've posted this info before.

But anyways, heres the instructions:
Blue on the harness goes to the Parking Lamp(+)
White=Blinker bulb(+)
Black=Ground

Then just plug the new M3 harness to the factory harness...and that should be all the wiring required.

Jay

[gnehc1]

Originally posted by akkordlayinkit
Im pretty sure that this is a repost, because I've posted this info before.

But anyways, heres the instructions:
Blue on the harness goes to the Parking Lamp(+)
White=Blinker bulb(+)
Black=Ground

Then just plug the new M3 harness to the factory harness...and that should be all the wiring required.

Jay

thanks for the info, have you done this install before? how do i make a clean install? i don't know how find the correct wires from the car harness (from underneath the dash) to connect to. would i run the wires from the engine bay?

[akkordlayinkit]

Originally posted by gnehc1
thanks for the info, have you done this install before? how do i make a clean install? i don't know how find the correct wires from the car harness (from underneath the dash) to connect to. would i run the wires from the engine bay?

Yea I installed a pair on my car a long time ago. When I wired mine up, I just ran the wires straight to the headlight housings, then wired up the blinker and running bulbs(+) to the M3 harness. It was alot easier for me just to run some extra wire straight to the bulbs rather than trying to find those two specific wires from all the others, and plus you can run the wires inside of the fender so you cant see them.

Jay

[gnehc1]

Originally posted by akkordlayinkit
Yea I installed a pair on my car a long time ago. When I wired mine up, I just ran the wires straight to the headlight housings, then wired up the blinker and running bulbs(+) to the M3 harness. It was alot easier for me just to run some extra wire straight to the bulbs rather than trying to find those two specific wires from all the others, and plus you can run the wires inside of the fender so you cant see them.

Jay

thanks, i'll give it a try later. any chance you remember how to remove the fender???

[deapost]

Dont remove the fender, fish a wire through it with a glowrod.

there should be an opening straight through

(glowrod is a green bendable rod with a hole at the end)

[gnehc1]

Originally posted by deapost
Dont remove the fender, fish a wire through it with a glowrod.

there should be an opening straight through

(glowrod is a green bendable rod with a hole at the end)

thanks, where could i find such an item? somewhere like home depot?

[5speedaccord]

just tape the wires to an old metal coat hanger....kinda bend it to the shape it is a straight through shot so its cake man.good luck.

[akkordlayinkit]

Originally posted by gnehc1
thanks, i'll give it a try later. any chance you remember how to remove the fender???

Theres no need to remove the fender...what I was referring to in this was is to:

Remove the 3-5 bolts on top of the fender(under the edge of the hood), then you should have enough room to slip the wires inside the fender...then just reinstall the bolts. That simple.

Jay