The H center caps

[mr_adrenalin714]

I've been wanting to get some center caps for my rota slipstreams, because some of my rota caps fell off, So does anyone know what type of honda center caps will fit the rota's, I would really appreciate it if any one could help me out

[InvaderTrax]

Can't say if they'll fit Slips, but I used the Civic steel wheel center caps in my ADRs

[mr_adrenalin714]

Can't say if they'll fit Slips, but I used the Civic steel wheel center caps in my ADRs

it looks clean, I know it's possible i've seen it on some fellow tuners, So if any one could help me out,

[h22sparkle]

nice car

[mr_adrenalin714]

So does any one have an idea what caps I could get that will fit my rota's

[90ACCORDLXGUY]

measure the hole and I will measure one of my center caps outta my sawblades. I think they might work.

[mr_adrenalin714]

measure the hole and I will measure one of my center caps outta my sawblades. I think they might work.

It's looks like they measure 2 1/2 inches

[93 cb7 ex]

i think the center caps from like the ep3(02 si)....

[90ACCORDLXGUY]

well the outer part of the cap is 2 3/4 but the inner which holds on to the wheels are about a hair bigger than 2 1/2. so they will work because inner is flexible so they will hold on the lip.

[mr_adrenalin714]

well the outer part of the cap is 2 3/4 but the inner which holds on to the wheels are about a hair bigger than 2 1/2. so they will work because inner is flexible so they will hold on the lip.

Thanks, for the info

[90ACCORDLXGUY]

Thanks, for the info

no problem

[Fatman88]

I know the thread is old but the Sawblade caps do fit the Slips. Mine dont clear the axle nut but they do fit.