Ultimate engine bay/wire tuck sneak peak

[turbo90accord]

I am not worried aout flexing or cracking nor heat issues. the epoxy that i used is designed for higher heat applications as well as has a higher flexibility amount than regular epoxy. Its also designed to stay clear. I spent ALOT of money making sure i bout the right epoxy so i wouldnt have issues. This project was done the right way from start to finish and have not short changed anything. when you do things right the first time you dont have to fix mistakes later.

on another note i just bout my fuel lines and filter/fittingsj and should have that all done today as well as have most of my motor put together today.

[zack_odom]

I am not worried aout flexing or cracking nor heat issues. the epoxy that i used is designed for higher heat applications as well as has a higher flexibility amount than regular epoxy. Its also designed to stay clear. I spent ALOT of money making sure i bout the right epoxy so i wouldnt have issues. This project was done the right way from start to finish and have not short changed anything. when you do things right the first time you dont have to fix mistakes later.

on another note i just bout my fuel lines and filter/fittingsj and should have that all done today as well as have most of my motor put together today.

Dude, u dont have to justify this. It is too awesome.
Refer to my post dude. People that hate=Jealous.

[turbo90accord]

fuel lines are completed as well as installed suspension so i could move the car around a bit in the garage. kinda cool to see it off jackstands and standing on its own 4 feet.
engine is completed only needs a couple hose clamps as well as torquing of the crank pully which is a pain cause i dont have a crank holding tool.

ill clean and ready my transmission today as well as finish hooking up the steering inside the car.

ordered a password jdm battery relocator kit that comes with a mini odyssey battery.

[zack_odom]

Weeeerrrrrrrd!!!!
I am still sooo Stoked to see this lol...

[sleepycb7]

this has to be one of the cleanest and smoothest engine bays ive ever seen!!!! props!!! got any more pics of progress???

[turbo90accord]

im gonna clean the bay tonight and take some final bay shots. got crank pulley bolt torqued and ready for engine to be installed.

[c mak]

I can't wait to see the final pics!! Its gong to be so purdy!! lol

[turbo90accord]

got pics taken will post them tomorrow.
recieved battery and mount for batt from password jdm.
installed engine and transmission
missing drivers side motor mount anybody have an extra?
hooked up battery and tested system.

[turbo90accord]

[bluecb7]

Sexy man.

[T04ECB7]

them are some small pictures. looks great from what i can see.

[Sobeman81]

any more updates?? got your hondata yet ?? could you also post a picture of a the password JDM battery relocator kit with the battery installed, i'm planning on getting the same thing, just wondering what it looks like installed. thanks man.

[turbo90accord]

have been working non stop so havent had time for updates. I did get the motor running and now have 200 miles on it and will have 500 before my tuning session on tuesday. Had to take off my modified h23 upper plenum in exchange for my f22a6 plenum due to a vacuum leak i cannot find causing the car to idle at 3000 rpm.

Tuning session will include install of the hondata and gm 3bar map sensor as wells as installation of my prologger's boost control solenoid. as well as 1000cc injectors. Fuel will be running e85. need to install my walbro 255 pump this weekend. We are expecting around 500 hp maybe more as this is kinda a first sohc build that is actually seriously built. The only limitation i forsee will be my turbo which will probably max out around 500hp. I also need to in the future have my intercooler piping reworked because its a bunch of universal bends and im not really feeling that. Id rather have one piece polished piping.
Im going to try to get some decent pictures this weekend of the engine bay after i clean it again. Pics taken in my garage suck due to my massive flourescent lite setup so id like to get some daylight pictures. I also plan on taking video of my dyno pulls for your guys.

[93twodoorLX]

i just read all 9 pages and wow dude i love the thought, originality, and not to mention the boosted single cam motor. i love it all

-sean

[turbo90accord]

pics