I'm having a very hard time putting this on. I'm pretty sure it's a legend lip.
Announcement
Collapse
No announcement yet.
Legend lip
Collapse
X
-
Cool story bro, you must have missed the DIY thread with pictures. It isn't that hard. I did it without the wood screws and maintained OEM hardware. Drilling and cutting will be involved.1993 SE Coupe MRT - 1992 LX Sedan MRT
93 Accord SE Bose Stereo MYTHS & FACTS - F22A* Power Plant Removal(UNDER CONSTRUCTION)
-
Ya I did some research on this site last night and found out that the sedan lip doesn't fit that well :\
I wish I knew that before i spent half an hour at the junkyard trying to get the lip off the acura.
OK almost got it on last night but gave up because I didn't really have the right tools. If I had a heating gun and something sharper to cut the plastic I would have gotitBLOOD ON THE LEAVES
Comment
-
Originally posted by RoseRoyce View PostYa I did some research on this site last night and found out that the sedan lip doesn't fit that well :\
I wish I knew that before i spent half an hour at the junkyard trying to get the lip off the acura.
OK almost got it on last night but gave up because I didn't really have the right tools. If I had a heating gun and something sharper to cut the plastic I would have gotit
Comment
-
Originally posted by 919coupe View Postyeah i used to have the sedan lip on mine and it was a bitch to get it to look half way decent. the coupe lip is alot easier to fit on the accord bumper, had to heat the corners up a little and i used wood screws on mine. just make sure you use the short ones if you do use them.ive also seen people put rivets in them as we;;BLOOD ON THE LEAVES
Comment
-
Originally posted by RoseRoyce View PostI was gona try it again but if it was a bitch to you too then maybe I won't. I have a 94 cd5 lip on now and I use zip ties. Might sound ghetto but zip ties are mayja
Comment
-
I'm sorry but self tapping screws or wood screws are the lazy way and incorrect way to do it. You should have kept all of the hardware from the donor car. I used all OEM hardware in mostly OEM locations on the Acura lip and adapted the CB7 bumper for it.1993 SE Coupe MRT - 1992 LX Sedan MRT
93 Accord SE Bose Stereo MYTHS & FACTS - F22A* Power Plant Removal(UNDER CONSTRUCTION)
Comment
-
Originally posted by wildBill83 View PostI'm sorry but self tapping screws or wood screws are the lazy way and incorrect way to do it. You should have kept all of the hardware from the donor car. I used all OEM hardware in mostly OEM locations on the Acura lip and adapted the CB7 bumper for it.Last edited by dayzielynn; 07-26-2013, 01:44 AM.
Comment
Comment