coupe patch quarters.

[brandenbmx]

I am looking for a source for quarter patch panels for my 91 coupe. I can find them for the 4 doors on google but no luck on coupes.

[JoshM]

Just trim a sedan panel.

[brandenbmx]

its into the lower section directly behind the door where the wheel well meets the rocker?
Here is a illistration.

[RagingAsian]

To my knoqledge the TSW patch panel is the only one known to be made at this point.

because you have rust in a area not defined by the panel, you will need to either have a patch panel made, or go to your jhunkyard and have a quarter panel cut out and patched in.

neither of which are cheap routes. but if you can have it done and its done correctly, it will look nice.

but I also would find the area of teh moisture that is getting behind your rockets and door jams.

[brandenbmx]

Yea.. This will be the third time fixed since I owned the car. The first he did it correct with new metal, it LOOKED NICE for about 2 years, but he didnt fix the "vent tube" from the roof line?
And the second time the guy Jacked me, and filled it with bondo, then painted. First winter it cracked and fell out. The rust has been getting worse ever since.. The pass side is worse because the peice behind the bumber where it mounts below the wheel well is GONE So thats got to be all fabbed also. I would buy all new quarters if I could find them for the coupe. Then Id have another 15 years of no rust.. lol. I dont think i can find decient quarters in Ohio... I just dont see them EVER.. Damn salt and snow...
Any one know where to get complete quarters? Forgot to mention the car is at the body shop now.. The shop is a good decient shop that does full fram off stuff and "points" restoration cars, and my one of my best friends works there so i know they will do good work, but the body guy was going to try to remake the wheel wells with front finders? I dont know how well this will turn out....
My end goal is to have a car as nice as the car shawn.hadden had on here. That WAS the cleanest accord I HAVE EVER EVER EVER SEEN. WOW minty.. Last time I heard someone bought it and it feel off the travlor and hit a wall or something.

anyone know what happened to it?

[ChampionPanda]

I have the same problem on mine for the rocker area. You will have to make one....I called TAS auto a while back and they were sold out of the rocker patch. As for the quarter what JoshM said will work fine get a 4 door and trim it. I dont know why that body guy would try to remake the wheel wells with front fenders those patches are perfect after they're trimmed up.