I have a harness Question

[nate'sCB7]

In a 90 coupe with auto seatbelts, is it possible to remove the auto-belts and install a harness bar in its place?

[wherm]

I wouldn't think there would be a place to bolt it in

[nate'sCB7]

i thought there would be considering that its possible to do a manual swap and the harness bar bolts to the same place on the b-pillar as the manual belts. what about the floor mount tho....i didnt even think about that one

[nucleara]

I did a autobelt to manual conversion, there is a big bolt about where you head is on the autobelts, I tapped it for the correct thread, however, you could use this to mount the top of a harness bar.

[nate'sCB7]

I did a autobelt to manual conversion, there is a big bolt about where you head is on the autobelts, I tapped it for the correct thread, however, you could use this to mount the top of a harness bar.

right, thats what i was thinking but what about that support bar or whatever you want to call it that goes to the floor?

[nucleara]

I would tie into one of the seat mounting brackets.

[nate'sCB7]

I would tie into one of the seat mounting brackets.

would it really go there tho?

and do you know if a 94-97 accord harness bar will fit in a cb7? just curious

[nucleara]

I don't know but I would go to the junkyard and take some measurements if I were you. and if its close let us know (anything can be made to fit).