Rotor-Over-Hub Conversions
This kit will convert your 90-97 pressed-on style front brakes to a standard, easy to work with slide-on rotor set-up. 90-97 Accords have pressed-on rotors that make replacing them very difficult because specialty tools are required. Make future brake jobs far easier and more cost effective.
90-97 ROTOR-OVER-HUB FRONT BRAKE CONVERSION (AKEBONO)
Fits 90-93 2dr/4dr models with Akebono style calipers and 94-97 2dr/4dr 4cyl Accords. Does not fit V6 or Wagon models.
Part #192100 Price:$359.95
90-97 ROTOR-OVER-HUB FRONT BRAKE CONVERSION (NISSIN)
Fits Nissin style calipers on 2dr/4dr 4cyl Accords. Does not fit V6 or Wagon models.
Part #192200 Price:$359.95
_______________________________________
90-97 PERFORMANCE ROTOR-OVER-HUB FT BRAKE CONVERSION-AKEBON0
This performance package includes cross-drilled rotors and carbomet brake pads.
Fits 90-93 2dr/4dr models with Akebono style calipers and 94-97 2dr/4dr 4cyl Accords. Does not fit V6 or Wagon models.
Part #192300 Price:$434.95
90-97 PERFORMANCE ROTOR-OVER-HUB FT BRAKE CONVERSION-NISSIN
This performance package includes cross-drilled rotors for reduced brake fade.
Fits Nissin style calipers on 2dr/4dr 4cyl Accords. Does not fit V6 or Wagon models.
Part #192400 Price:$434.95
90-97 WAGON ROTOR-OVER-HUB FRONT BRAKE CONVERSION
This kit will convert your 90-97 pressed-on style front brakes to a standard, easy to work with slide-on rotor set-up. 90-97 Accords have pressed-on rotors that make replacing them very difficult because specialty tools are required. Make future brake jobs far easier and more cost effective. Comes with the bearing already pressed onto the hub for easy installation
Only fits wagon models
Part #192500 Price:$364.95
90-97 POWER SLOT PLUS FRONT BIG BRAKE KIT
The Power Slot Plus system uses a larger diameter, premium brake rotor combined with your original factory brake calipers. Relocation brackets space the factory caliper further away from the hub to accommodate a huge 12.15" oversized brake rotor. This increases brake torque force without affecting pedal effort or travel. The larger rotor is also a more effective heat sink, absorbing the heat generated under heavy braking. This greatly reduces brake fade and provides consistently shorter stopping distances, especially from higher speeds. Bolt-on, no modifications needed.
Fits 90-93 2/4dr cars & all 94-97 2/4dr Accords. Does not fit V6/Wagon models.
Power Slot Plus brake kits require the use of larger diameter wheels.
Part #719511 Price:$524.95
ARP STAINLESS EXHAUST STUDS (SET OF 8)
Replace your rusted and damaged exhaust studs with this stainless set from ARP. If you are installing a new header on your car why use old harware. Include a set of 8 studs. These ARP studs are tested to 170,000 psi tensile strength.
Part #568013 Price:$79.95
90-02 ARP EXTENDED WHEEL STUDS (16)
ARP's heat-treated 8740 chromemoly wheel studs have a tensile strength of 200,000 psi and are designed to handle to extreme forces of racing. Great addition for any car that will see track time or for anyone looking to give their car the race look. Requires the use of open ended lug nuts such as our #710825. Includes 16 studs.
Part #567713 Price:$59.95
Also available in packs of 4
Part #567711 Price:$18.95
90-02 EXTENDED WHEEL STUDS AND LUGS
Combine Skunk2's forged racing lug nuts with ARP's extended wheel studs for the ultimate wheel hardware combination. Skunk2 lugs are made from super strong AL7075 aluminum/magnesium alloy and are hard-anodized. ARP's heat-treated 8740 chromemoly wheel studs have a tensile strength of 200,000 psi and are designed to handle to extreme forces of racing. Great addition for any car that will see track time or for anyone looking to give their car the race look. These lugs have a conical shaped seal for aftermarket wheels. 12 x 1.5. Includes 16 studs and 16 lugs. Buy together and save!
Part #710826 Price:$139.95
90-93 STEEL BRAIDED BRAKE LINE SET
Earl's Hyperfirm brake lines not only meet D.O.T., T.U.V., & J.W.A. standards and specifications, they are also pressure tested at 4,000 psi, far above D.O.T. standards. Hyperfirm lines will provide a firmer brake pedal and shorter stopping distances because of the reduced line swell common to stock rubber lines. Great upgrade for any of our big rotor kits. Image may differ from actual product.
Part #570010 Price:$139.95
SPEED BLEEDER VALVE (PAIR)
Simplify your brake bleeding experience with Speed Bleeder valves. Replace your stock bleeder valves with the Speed Bleeders and make brake system bleeding a one person job. Open the bleeders a 1/4-1/2 turn, pump brakes until air is purged (no closing valve between pumps), close the valve and move onto next wheel. Each part # purchased includes 2 valves. Fits 90-979 Nissin front calipers, 90-02 rear disc brakes and 90-92 rear drum brakes. 10mm x 1.25
Part #560027 Price:$15.95
EBC BRAKE PADS
We have added EBC Green and Red brake pads to our product offering.
Comment