Window help?

[BbEnz]

Ok so since last week my window was messing up and I thought it was off track
but today when I removed the panel I found out that the window isn't sticking to
that white thing it sits in, sorry I don't know the name of it, but
I was wondering is there anything that I can use to hold it in place.

Also after I took off the panel and put it back on it says my door is still open when its closed?
I think I might have not plug something back in but I will check. Is there anything else that it could be?

[NWaccordd]

Well, the white clip/holder is bolted to the regulator with 2 bolts. And for me those 2 bolts were stripped so when the motor moved the window gets jammed at a weird angle. If that's your problem then get washers and new bolts/nuts to tighten it back down so the window doesn't move side to side. But if you mean the white clip is coming unglued from the window I wouldn't know what could stick them
back together :/

[BbEnz]

Well, the white clip/holder is bolted to the regulator with 2 bolts. And for me those 2 bolts were stripped so when the motor moved the window gets jammed at a weird angle. If that's your problem then get washers and new bolts/nuts to tighten it back down so the window doesn't move side to side. But if you mean the white clip is coming unglued from the window I wouldn't know what could stick them
back together :/

Yeah its becoming unglued. Thanks though.

[NWaccordd]

Guerrilla glue? Haha

[TomQuick]

Try cleaning it really good (I'd probably take the window out) and using some 5 min epoxy on it.

[HondaGuy1212]

Try cleaning it really good (I'd probably take the window out) and using some 5 min epoxy on it.

This.

Regarding the door ajar light, you probably forgot to reconnect one of the harness plugs.

[BbEnz]

Try cleaning it really good (I'd probably take the window out) and using some 5 min epoxy on it.

Alright I'll go buy some today or tomorrow and do it.

This.

Regarding the door ajar light, you probably forgot to reconnect one of the harness plugs.

Ok I'll check them when I'm taking care of the window.

Thanks guys.

[TomQuick]

Let us know how it works out!

[BbEnz]

Well its fixed now the epoxy worked. Except now its kind of off track because the
clip was loose and I over tightened one of the bolts and snapped it.

[benjiaccord]

Whoops!

[TomQuick]

Get that broken bolt out of there, and put in a new one, shouldn't be terribly difficult to do.

[BbEnz]

Haha yeah I know.