looking for more power

[TexasBoi19]

sup guys just needed some advice!! i decided to stay with the F22a6 motor but im lookin for more power. the parts i have are intake, headers, exaust, cam gear, and tokico suspension, the car is great and even though the engine is pushing 168k it runs smooth. but im lookin for more power and im just wondering wat else i should do!?!?

[10thcb7]

tune up. vacuum hoses to rad cap ect. all those little things that dont make a difference for power help keep it there, If you really want to 'feel' dA P{}Wa keep your motor mounst filled with prothane which will shake a lil from what I hear. n2o

[90ACCORDLXGUY]

H23 IM, maybe bigger injectors

[TexasBoi19]

i also thought about the f22b1 head swap but is it worth it??

[Ghetto_Accord]

You could always drop a turbo in it. F22s With Turbos are very quick!

[cvc7chris]

turbo it man

[HondaGuy1212]

i also thought about the f22b1 head swap but is it worth it??

No, it's not worth it at all. The head flow isn't that good either.


If you were to swap go for an H22 or the F22B.

[TexasBoi19]

turbo sounds good to me but would i have to change my inertnals for that?? and by the way who makes turbos for the cb7s??

[blackcb7]

search dsm turbo

no need to change internals unless your making big power or plan to up the psi.

[jdmsilvercb7]

h23/f22b swap would be well more worth it then f22b1 and it could be cheaper then a turbo

[TexasBoi19]

gotcha thanks for the info everyone!! oh yeah one more thing!!! the IM?? should i go with the H23 IM or wat?? ive been lookin at f22parts.com but are their parts need some work done for them to fit or do they bolt right up??

[hs06]

i have same more motor have intake and cat back i wanna do little shit to wat bout feul rails? and feul reglators ?

[jdmsilvercb7]

def. go with the h23 IM cause if you do the swap itll bolt right up. The only f22 thats worth it it the f22a6, but the h23 is better anyway. None of the f22bx IM have the butterflies that the a6 and h23 IM have so they wont be worth it at all.

[Losiracer2]

yeah and while your swapping for an H23IM, might wanna think about getting a 3 inch intake as well. Since the stock 2.5 cold air is too small for the bigger throttle body.....COULD also bore out the TB and Plenum by sending it to a this maxbore place. OH and the Delta 272 cam is a good upgrade as well.

[TexasBoi19]

where can i find one?? any other good mods worth thinkin bout before i turbo. should i go with a better ecu??