Problem with power door locks

[amazin'_asian]

I have to hit the lock button several times before the door is actually locked. Each time I hit the button the lock moves like a 1/2 inch so I end up hitting it like 2 or 3 times to get it to lock. Has anyone else had this problem or know a way to fix it?

- thanks

[ExplodingCake]

I have to hit the lock button several times before the door is actually locked. Each time I hit the button the lock moves like a 1/2 inch so I end up hitting it like 2 or 3 times to get it to lock. Has anyone else had this problem or know a way to fix it?

- thanks

yeah I have the same problem.. I believe the lock motor actuators are dying.. I have one dead already. One is having the same bacteria as yours.

Me personally I hate auto door locks. I'd rather lock them on my own.

[visualpoet]

I'd also try popping the panels and check to see if all the rods are lubed where they rub against anything. A little friction can cause problems and wear out your actuators faster.

[cvc7chris]

driver side door lock

btw the driver side door lock won't lock unless it's close!!!

that's what both of my cb's did

so im guessing that's the same

i have a remove door lock thing so mine lock

but when i manually tried to lock it
when the drivers door was open it would move like a little bit but wouldn't lock

[amazin'_asian]

I'd also try popping the panels and check to see if all the rods are lubed where they rub against anything. A little friction can cause problems and wear out your actuators faster.

Thanks for the info , I'll make sure to check for this.